iio: Add a comment to about alphabetical order to Kconfigs and Makefiles

Keeping Makefile and Kconfig entries in alphabetical order usually works better
than just appending new entries at the end, since it reduces the amount of
conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to
document that the entries should be kept in alphabetical order.

Also reorder those  entries which weren't in alphabetical order yet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/accel/Kconfig

@@ -1,6 +1,8 @@
 #
 # Accelerometer drivers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Accelerometers"
 
 config HID_SENSOR_ACCEL_3D
@@ -14,13 +16,6 @@ config HID_SENSOR_ACCEL_3D
 	  Say yes here to build support for the HID SENSOR
 	  accelerometers 3D.
 
-config KXSD9
-	tristate "Kionix KXSD9 Accelerometer Driver"
-	depends on SPI
-	help
-	  Say yes here to build support for the Kionix KXSD9 accelerometer.
-	  Currently this only supports the device via an SPI interface.
-
 config IIO_ST_ACCEL_3AXIS
 	tristate "STMicroelectronics accelerometers 3-Axis Driver"
 	depends on (I2C || SPI_MASTER) && SYSFS
@@ -51,4 +46,11 @@ config IIO_ST_ACCEL_SPI_3AXIS
 	depends on IIO_ST_ACCEL_3AXIS
 	depends on IIO_ST_SENSORS_SPI
 
+config KXSD9
+	tristate "Kionix KXSD9 Accelerometer Driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Kionix KXSD9 accelerometer.
+	  Currently this only supports the device via an SPI interface.
+
 endmenu

drivers/iio/accel/Makefile

@@ -2,7 +2,9 @@
 # Makefile for industrial I/O accelerometer drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_KXSD9)	+= kxsd9.o
 
 obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
 st_accel-y := st_accel_core.o
@@ -10,5 +12,3 @@ st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
 
 obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
 obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
-
-obj-$(CONFIG_KXSD9)	+= kxsd9.o

drivers/iio/adc/Kconfig

@@ -1,6 +1,8 @@
 #
 # ADC drivers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Analog to digital converters"
 
 config AD_SIGMA_DELTA
@@ -30,17 +32,20 @@ config AD7298
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7298.
 
-config AD7923
-	tristate "Analog Devices AD7923 and similar ADCs driver"
+config AD7476
+	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for Analog Devices
-	  AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
+	  Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
+	  AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
+	  AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
+
+	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ad7923.
+	  module will be called ad7476.
 
 config AD7791
 	tristate "Analog Devices AD7791 ADC driver"
@@ -66,33 +71,30 @@ config AD7793
 	  To compile this driver as a module, choose M here: the
 	  module will be called AD7793.
 
-config AD7476
-	tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
+config AD7887
+	tristate "Analog Devices AD7887 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
-	  AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
-	  AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
-
+	  Say yes here to build support for Analog Devices
+	  AD7887 SPI analog to digital converter (ADC).
 	  If unsure, say N (but it's safe to say "Y").
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ad7476.
+	  module will be called ad7887.
 
-config AD7887
-	tristate "Analog Devices AD7887 ADC driver"
+config AD7923
+	tristate "Analog Devices AD7923 and similar ADCs driver"
 	depends on SPI
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Analog Devices
-	  AD7887 SPI analog to digital converter (ADC).
-	  If unsure, say N (but it's safe to say "Y").
+	  AD7904, AD7914, AD7923, AD7924 4 Channel ADCs.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ad7887.
+	  module will be called ad7923.
 
 config AT91_ADC
 	tristate "Atmel AT91 ADC"

drivers/iio/adc/Makefile

@@ -2,6 +2,7 @@
 # Makefile for IIO ADC drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7298) += ad7298.o

drivers/iio/amplifiers/Kconfig

@@ -1,6 +1,8 @@
 #
 # Gain Amplifiers, etc.
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Amplifiers"
 
 config AD8366

drivers/iio/amplifiers/Makefile

@@ -2,4 +2,5 @@
 # Makefile iio/amplifiers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD8366) += ad8366.o

drivers/iio/common/Makefile

@@ -6,5 +6,6 @@
 # instead of duplicating in each module.
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-y += hid-sensors/
 obj-y += st_sensors/

drivers/iio/dac/Kconfig

@@ -1,6 +1,8 @@
 #
 # DAC drivers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Digital to analog converters"
 
 config AD5064
@@ -48,13 +50,6 @@ config AD5421
 	  To compile this driver as module choose M here: the module will be called
 	  ad5421.
 
-config AD5624R_SPI
-	tristate "Analog Devices AD5624/44/64R DAC spi driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices AD5624R, AD5644R and
-	  AD5664R converters (DAC). This driver uses the common SPI interface.
-
 config AD5446
 	tristate "Analog Devices AD5446 and similar single channel DACs driver"
 	depends on (SPI_MASTER && I2C!=m) || I2C
@@ -87,6 +82,24 @@ config AD5504
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5504.
 
+config AD5624R_SPI
+	tristate "Analog Devices AD5624/44/64R DAC spi driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD5624R, AD5644R and
+	  AD5664R converters (DAC). This driver uses the common SPI interface.
+
+config AD5686
+	tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD5686R, AD5685R,
+	  AD5684R, AD5791 Voltage Output Digital to
+	  Analog Converter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5686.
+
 config AD5755
 	tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver"
 	depends on SPI_MASTER
@@ -119,17 +132,6 @@ config AD5791
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5791.
 
-config AD5686
-	tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
-	depends on SPI
-	help
-	  Say yes here to build support for Analog Devices AD5686R, AD5685R,
-	  AD5684R, AD5791 Voltage Output Digital to
-	  Analog Converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ad5686.
-
 config AD7303
 	tristate "Analog Devices AD7303 DAC driver"
 	depends on SPI

drivers/iio/dac/Makefile

@@ -2,6 +2,7 @@
 # Makefile for industrial I/O DAC drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD5360) += ad5360.o
 obj-$(CONFIG_AD5380) += ad5380.o
 obj-$(CONFIG_AD5421) += ad5421.o

drivers/iio/frequency/Kconfig

@@ -4,6 +4,7 @@
 #	Clock Distribution device drivers
 #	Phase-Locked Loop (PLL) frequency synthesizers
 #
+# When adding new entries keep the list in alphabetical order
 
 menu "Frequency Synthesizers DDS/PLL"
 

drivers/iio/frequency/Makefile

@@ -2,5 +2,6 @@
 # Makefile iio/frequency
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD9523) += ad9523.o
 obj-$(CONFIG_ADF4350) += adf4350.o

drivers/iio/gyro/Kconfig

@@ -1,6 +1,8 @@
 #
 # IIO Digital Gyroscope Sensor drivers configuration
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Digital gyroscope sensors"
 
 config ADIS16080

drivers/iio/gyro/Makefile

@@ -2,6 +2,7 @@
 # Makefile for industrial I/O gyroscope sensor drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16080) += adis16080.o
 obj-$(CONFIG_ADIS16130) += adis16130.o
 obj-$(CONFIG_ADIS16136) += adis16136.o

drivers/iio/imu/Kconfig

@@ -1,6 +1,8 @@
 #
 # IIO imu drivers configuration
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Inertial measurement units"
 
 config ADIS16400

drivers/iio/imu/Makefile

@@ -2,6 +2,7 @@
 # Makefile for Inertial Measurement Units
 #
 
+# When adding new entries keep the list in alphabetical order
 adis16400-y             := adis16400_core.o
 adis16400-$(CONFIG_IIO_BUFFER) += adis16400_buffer.o
 obj-$(CONFIG_ADIS16400) += adis16400.o

drivers/iio/light/Kconfig

@@ -1,6 +1,8 @@
 #
 # Light sensors
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Light sensors"
 
 config ADJD_S311
@@ -15,6 +17,17 @@ config ADJD_S311
 	 This driver can also be built as a module.  If so, the module
 	 will be called adjd_s311.
 
+config HID_SENSOR_ALS
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID ALS"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Ambient light sensor.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
@@ -52,15 +65,4 @@ config VCNL4000
 	 To compile this driver as a module, choose M here: the
 	 module will be called vcnl4000.
 
-config HID_SENSOR_ALS
-	depends on HID_SENSOR_HUB
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	select HID_SENSOR_IIO_COMMON
-	select HID_SENSOR_IIO_TRIGGER
-	tristate "HID ALS"
-	help
-	  Say yes here to build support for the HID SENSOR
-	  Ambient light sensor.
-
 endmenu

drivers/iio/light/Makefile

@@ -2,8 +2,9 @@
 # Makefile for IIO Light sensors
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
+obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
-obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o

drivers/iio/magnetometer/Kconfig

@@ -1,6 +1,8 @@
 #
 # Magnetometer sensors
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Magnetometer sensors"
 
 config AK8975

drivers/iio/magnetometer/Makefile

@@ -2,6 +2,7 @@
 # Makefile for industrial I/O Magnetometer sensor drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AK8975)	+= ak8975.o
 obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
 

drivers/iio/pressure/Kconfig

@@ -1,6 +1,8 @@
 #
 # Pressure drivers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Pressure sensors"
 
 config IIO_ST_PRESS

drivers/iio/pressure/Makefile

@@ -2,6 +2,7 @@
 # Makefile for industrial I/O pressure drivers
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
 st_pressure-y := st_pressure_core.o
 st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o

drivers/iio/trigger/Kconfig

@@ -1,6 +1,8 @@
 #
 # Industrial I/O standalone triggers
 #
+# When adding new entries keep the list in alphabetical order
+
 menu "Triggers - standalone"
 
 config IIO_INTERRUPT_TRIGGER

drivers/iio/trigger/Makefile

@@ -2,5 +2,6 @@
 # Makefile for triggers not associated with iio-devices
 #
 
+# When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
 obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o