Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
10 years ago · 076ce44825
parent d649a7a81f b23dc5a7cc
commit 076ce44825
419 changed files with 3955 additions and 2476 deletions
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@ -7,7 +7,10 @@ Required properties:
 			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2)
+			    - "renesas,thermal-r8a7791" (R-Car M2-W)
+			    - "renesas,thermal-r8a7792" (R-Car V2H)
+			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a7794" (R-Car E2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.

 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
-			scanned for Logical Units (default 5).
+			scanned for Logical Units (default 1).

 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@ -221,12 +221,11 @@ ccs_out_mode: specify the allowed video output crop/compose/scaling combination
 		       key, not quality.

 multiplanar: select whether each device instance supports multi-planar formats,
-	and thus the V4L2 multi-planar API. By default the first device instance
-	is single-planar, the second multi-planar, and it keeps alternating.
+	and thus the V4L2 multi-planar API. By default device instances are
+	single-planar.

 	This module option can override that for each instance. Values are:

-		0: use alternating single and multi-planar devices.
 		1: this is a single-planar instance.
 		2: this is a multi-planar instance.

@ -975,9 +974,8 @@ is set, then the alpha component is only used for the color red and set to
 0 otherwise.

 The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.

 If the driver instance is using the multiplanar formats/API, then the first
 single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
@ -1021,7 +1019,7 @@ the output overlay for the video output, turn on video looping and capture
 to see the blended framebuffer overlay that's being written to by the second
 instance. This setup would require the following commands:

-	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+	$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
 	$ v4l2-ctl -d1 --find-fb
 	/dev/fb1 is the framebuffer associated with base address 0x12800000
 	$ sudo v4l2-ctl -d2 --set-fbuf fb=1
--- a/22
+++ b/22
@ -1543,6 +1543,7 @@ F:	arch/arm/mach-pxa/include/mach/z2.h

 ARM/ZYNQ ARCHITECTURE
 M:	Michal Simek <michal.simek@xilinx.com>
+R:	Sören Brinkmann <soren.brinkmann@xilinx.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://wiki.xilinx.com
 T:	git git://git.xilinx.com/linux-xlnx.git
@ -2071,8 +2072,9 @@ F:	drivers/clocksource/bcm_kona_timer.c

 BROADCOM BCM2835 ARM ARCHITECTURE
 M:	Stephen Warren <swarren@wwwdotorg.org>
+M:	Lee Jones <lee@kernel.org>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
 S:	Maintained
 N:	bcm2835

@ -4320,8 +4322,10 @@ F:	Documentation/blockdev/cpqarray.txt
 F:	drivers/block/cpqarray.*

 HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
-M:	"Stephen M. Cameron" <scameron@beardog.cce.hp.com>
+M:	Don Brace <don.brace@pmcs.com>
 L:	iss_storagedev@hp.com
+L:	storagedev@pmcs.com
+L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/hpsa.txt
 F:	drivers/scsi/hpsa*.[ch]
@ -4329,8 +4333,10 @@ F:	include/linux/cciss*.h
 F:	include/uapi/linux/cciss*.h

 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-M:	Mike Miller <mike.miller@hp.com>
+M:	Don Brace <don.brace@pmcs.com>
 L:	iss_storagedev@hp.com
+L:	storagedev@pmcs.com
+L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/blockdev/cciss.txt
 F:	drivers/block/cciss*
@ -4725,6 +4731,7 @@ L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/
 F:	drivers/staging/iio/
+F:	include/linux/iio/

 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
@ -7195,6 +7202,7 @@ F:	drivers/crypto/picoxcell*

 PIN CONTROL SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
+L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
@ -8499,7 +8507,6 @@ F:	arch/arm/mach-s3c24xx/bast-irq.c
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
 M:	Kevin Hilman <khilman@deeprootsystems.com>
-L:	davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-davinci/linux-davinci.git
 Q:	http://patchwork.kernel.org/project/linux-davinci/list/
 S:	Supported
@ -8509,7 +8516,6 @@ F:	drivers/i2c/busses/i2c-davinci.c
 TI DAVINCI SERIES MEDIA DRIVER
 M:	Lad, Prabhakar <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
-L:	davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
 W:	http://linuxtv.org/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
@ -9626,7 +9632,6 @@ F:     drivers/staging/unisys/

 UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
 M:	Vinayak Holikatti <vinholikatti@gmail.com>
-M:	Santosh Y <santoshsy@gmail.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/ufs.txt
@ -9720,11 +9725,6 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/

-USB/IP DRIVERS
-L:	linux-usb@vger.kernel.org
-S:	Orphan
-F:	drivers/staging/usbip/
-
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
--- a/4
+++ b/4
@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 18
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
-NAME = Shuffling Zombie Juror
+EXTRAVERSION = -rc4
+NAME = Diseased Newt

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -1187,7 +1187,7 @@ config DEBUG_UART_VIRT
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
 	default 0xf1c28400 if DEBUG_SUNXI_UART1
 	default 0xf1f02800 if DEBUG_SUNXI_R_UART
-	default 0xf2100000 if DEBUG_PXA_UART1
+	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
 	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@ -33,6 +33,13 @@

 };

+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &fec1 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@ -42,6 +49,18 @@

 &iomuxc {
 	vf610-cosmic {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
 		pinctrl_fec1: fec1grp {
 			fsl,pins = <
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@ -34,6 +34,10 @@
 	};
 };

+&clkc {
+	fclk-enable = <0xf>;
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/edma.h>
+#include <linux/dma-mapping.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>
@ -1623,6 +1624,11 @@ static int edma_probe(struct platform_device *pdev)
 	struct device_node	*node = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	int			ret;
+	struct platform_device_info edma_dev_info = {
+		.name = "edma-dma-engine",
+		.dma_mask = DMA_BIT_MASK(32),
+		.parent = &pdev->dev,
+	};

 	if (node) {
 		/* Check if this is a second instance registered */
@ -1793,6 +1799,9 @@ static int edma_probe(struct platform_device *pdev)
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
 		}
 		arch_num_cc++;
+
+		edma_dev_info.id = j;
+		platform_device_register_full(&edma_dev_info);
 	}

 	return 0;
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_GPIO_SYSFS=y
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
 CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@ -235,6 +235,7 @@ CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8084=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_DWAPB=y
@ -411,6 +412,7 @@ CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_QCOM_GSBI=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@ -86,7 +86,6 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
@ -112,6 +111,7 @@ CONFIG_MTD_OOPS=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
 CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
@ -317,7 +317,7 @@ CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@ -1,5 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@ -11,23 +12,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_HOTPLUG=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SOCFPGA=y
-CONFIG_MACH_SOCFPGA_CYCLONE5=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
@ -41,38 +36,30 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_GW=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
 CONFIG_CAN_C_CAN=y
 CONFIG_CAN_C_CAN_PLATFORM=y
 CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SRAM=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_SOCFPGA=y
 CONFIG_MICREL_PHY=y
-# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_DWMAC_SOCFPGA=y
-CONFIG_PPS=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_GARP=y
-CONFIG_IPV6=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
@ -81,45 +68,43 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
-# CONFIG_RTC_HCTOSYS is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_SENSORS_LTC2978_REGULATOR=y
 CONFIG_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_FHANDLE=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_NTFS_RW=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_ENABLE_DEFAULT_TRACERS=y
 CONFIG_DEBUG_USER=y
 CONFIG_XZ_DEC=y
-CONFIG_I2C=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_PM=y
-CONFIG_SUSPEND=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PLATFORM=y
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@ -412,6 +412,7 @@
 #define __NR_seccomp			(__NR_SYSCALL_BASE+383)
 #define __NR_getrandom			(__NR_SYSCALL_BASE+384)
 #define __NR_memfd_create		(__NR_SYSCALL_BASE+385)
+#define __NR_bpf			(__NR_SYSCALL_BASE+386)

 /*
 * The following SWIs are ARM private.
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@ -395,6 +395,7 @@
 		CALL(sys_seccomp)
 		CALL(sys_getrandom)
 /* 385 */	CALL(sys_memfd_create)
+		CALL(sys_bpf)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@ -58,8 +58,14 @@
 #define PFD_PLL1_BASE		(anatop_base + 0x2b0)
 #define PFD_PLL2_BASE		(anatop_base + 0x100)
 #define PFD_PLL3_BASE		(anatop_base + 0xf0)
+#define PLL1_CTRL		(anatop_base + 0x270)
+#define PLL2_CTRL		(anatop_base + 0x30)
 #define PLL3_CTRL		(anatop_base + 0x10)
+#define PLL4_CTRL		(anatop_base + 0x70)
+#define PLL5_CTRL		(anatop_base + 0xe0)
+#define PLL6_CTRL		(anatop_base + 0xa0)
 #define PLL7_CTRL		(anatop_base + 0x20)
+#define ANA_MISC1		(anatop_base + 0x160)

 static void __iomem *anatop_base;
 static void __iomem *ccm_base;
@ -67,25 +73,34 @@ static void __iomem *ccm_base;
 /* sources for multiplexer clocks, this is used multiple times */
 static const char *fast_sels[]	= { "firc", "fxosc", };
 static const char *slow_sels[]	= { "sirc_32k", "sxosc", };
-static const char *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[]	= { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[]	= { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
 static const char *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
 static const char *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
 static const char *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
 static const char *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[]	= { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[]	= { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_usb_otg", };
 static const char *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[]	= { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
 /* FTM counter clock source, not module clock */
 static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
 static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };

-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
 	{ .val = 0, .div = 1 },
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 6 },
@ -120,6 +135,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
 	clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);

+	/* Clock source from external clock via LVDs PAD */
+	clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
 	clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);

 	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
@ -133,31 +151,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
 	clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));

-	clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
-	clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
-	clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
-	clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
-	clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
-
-	clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
-	clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
-	clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
-	clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
-	clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
-
-	clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
-	clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
-	clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
-	clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
-	clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
-
-	clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
-	/* Enet pll: fixed 50Mhz */
-	clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
-	/* pll6: default 960Mhz */
-	clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
-	/* pll7: USB1 PLL at 480MHz */
-	clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+	clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+	clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+	clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+	clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+	clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+	clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+	clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET,    "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+	clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV,      "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+	clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB,     "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+
+	clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+	clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+	/* Do not bypass PLLs initially */
+	clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+	clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+	clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+	clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+	clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+	clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+	clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+	clk[VF610_CLK_PLL1_SYS]      = imx_clk_gate("pll1_sys",      "pll1_bypass", PLL1_CTRL, 13);
+	clk[VF610_CLK_PLL2_BUS]      = imx_clk_gate("pll2_bus",      "pll2_bypass", PLL2_CTRL, 13);
+	clk[VF610_CLK_PLL3_USB_OTG]  = imx_clk_gate("pll3_usb_otg",  "pll3_bypass", PLL3_CTRL, 13);
+	clk[VF610_CLK_PLL4_AUDIO]    = imx_clk_gate("pll4_audio",    "pll4_bypass", PLL4_CTRL, 13);
+	clk[VF610_CLK_PLL5_ENET]     = imx_clk_gate("pll5_enet",     "pll5_bypass", PLL5_CTRL, 13);
+	clk[VF610_CLK_PLL6_VIDEO]    = imx_clk_gate("pll6_video",    "pll6_bypass", PLL6_CTRL, 13);
+	clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+	clk[VF610_CLK_LVDS1_IN]  = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+	clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+	clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+	clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+	clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+	clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+	clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+	clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+	clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+	clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+	clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+	clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+	clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);

 	clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
 	clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@ -167,12 +217,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
 	clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);

-	clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
-	clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
-	clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+	clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+	clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+	clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);

-	clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
-	clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+	clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+	clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);

 	clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
 	clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@ -191,8 +241,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
 	clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));

-	clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
-	clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+	clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+	clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
 	clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
 	clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
 	clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@ -76,7 +76,7 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
 	u32 n, byte_enables, data;

 	if (!is_pci_memory(addr)) {
-		__raw_writeb(value, addr);
+		__raw_writeb(value, p);
 		return;
 	}

@ -141,7 +141,7 @@ static inline unsigned char __indirect_readb(const volatile void __iomem *p)
 	u32 n, byte_enables, data;

 	if (!is_pci_memory(addr))
-		return __raw_readb(addr);
+		return __raw_readb(p);

 	n = addr % 4;
 	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@ -917,6 +917,10 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
 static int __init omap_device_late_init(void)
 {
 	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+	WARN(!of_have_populated_dt(),
+		"legacy booting deprecated, please update to boot with .dts\n");
+
 	return 0;
 }
 omap_late_initcall_sync(omap_device_late_init);
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@ -38,6 +38,11 @@
 #define DMEMC_VIRT		IOMEM(0xf6100000)
 #define DMEMC_SIZE		0x00100000

+/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
 /*
 * Internal Memory Controller (PXA27x and later)
 */
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@ -956,7 +956,7 @@ static u32 cache_id_part_number_from_dt;
 * @associativity: variable to return the calculated associativity in
 * @max_way_size: the maximum size in bytes for the cache ways
 */
-static void __init l2x0_cache_size_of_parse(const struct device_node *np,
+static int __init l2x0_cache_size_of_parse(const struct device_node *np,
 					    u32 *aux_val, u32 *aux_mask,
 					    u32 *associativity,
 					    u32 max_way_size)
@ -974,7 +974,7 @@ static void __init l2x0_cache_size_of_parse(const struct device_node *np,
 	of_property_read_u32(np, "cache-line-size", &line_size);

 	if (!cache_size || !sets)
-		return;
+		return -ENODEV;

 	/* All these l2 caches have the same line = block size actually */
 	if (!line_size) {
@ -1009,7 +1009,7 @@ static void __init l2x0_cache_size_of_parse(const struct device_node *np,

 	if (way_size > max_way_size) {
 		pr_err("L2C OF: set size %dKB is too large\n", way_size);
-		return;
+		return -EINVAL;
 	}

 	pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
@ -1027,7 +1027,7 @@ static void __init l2x0_cache_size_of_parse(const struct device_node *np,
 	if (way_size_bits < 1 || way_size_bits > 6) {
 		pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
 		       way_size);
-		return;
+		return -EINVAL;
 	}

 	mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
@ -1036,6 +1036,8 @@ static void __init l2x0_cache_size_of_parse(const struct device_node *np,
 	*aux_val &= ~mask;
 	*aux_val |= val;
 	*aux_mask &= ~mask;
+
+	return 0;
 }

 static void __init l2x0_of_parse(const struct device_node *np,
@ -1046,6 +1048,7 @@ static void __init l2x0_of_parse(const struct device_node *np,
 	u32 dirty = 0;
 	u32 val = 0, mask = 0;
 	u32 assoc;
+	int ret;

 	of_property_read_u32(np, "arm,tag-latency", &tag);
 	if (tag) {
@ -1068,7 +1071,10 @@ static void __init l2x0_of_parse(const struct device_node *np,
 		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
 	}

-	l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+	ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+	if (ret)
+		return;
+
 	if (assoc > 8) {
 		pr_err("l2x0 of: cache setting yield too high associativity\n");
 		pr_err("l2x0 of: %d calculated, max 8\n", assoc);
@ -1125,6 +1131,7 @@ static void __init l2c310_of_parse(const struct device_node *np,
 	u32 tag[3] = { 0, 0, 0 };
 	u32 filter[2] = { 0, 0 };
 	u32 assoc;
+	int ret;

 	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
 	if (tag[0] && tag[1] && tag[2])
@ -1152,7 +1159,10 @@ static void __init l2c310_of_parse(const struct device_node *np,
 			       l2x0_base + L310_ADDR_FILTER_START);
 	}

-	l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+	ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+	if (ret)
+		return;
+
 	switch (assoc) {
 	case 16:
 		*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
@ -1164,8 +1174,8 @@ static void __init l2c310_of_parse(const struct device_node *np,
 		*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
 		break;
 	default:
-		pr_err("PL310 OF: cache setting yield illegal associativity\n");
-		pr_err("PL310 OF: %d calculated, only 8 and 16 legal\n", assoc);
+		pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
+		       assoc);
 		break;
 	}
 }
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -1198,7 +1198,6 @@ __iommu_alloc_remap(struct page **pages, size_t size, gfp_t gfp, pgprot_t prot,
 {
 	return dma_common_pages_remap(pages, size,
 			VM_ARM_DMA_CONSISTENT | VM_USERMAP, prot, caller);
-	return NULL;
 }

 /*
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@ -127,8 +127,11 @@ void *kmap_atomic_pfn(unsigned long pfn)
 {
 	unsigned long vaddr;
 	int idx, type;
+	struct page *page = pfn_to_page(pfn);

 	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);

 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR * smp_processor_id();
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -35,6 +35,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_XGENE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_KSM=y
@ -52,6 +55,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_BPF_JIT=y
 # CONFIG_WIRELESS is not set
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
@ -65,16 +69,17 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
+CONFIG_NET_XGENE=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-CONFIG_NET_XGENE=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
@ -87,6 +92,11 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+# CONFIG_HMC_DRV is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_XGENE=y
 # CONFIG_HWMON is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@ -97,13 +107,25 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_XGENE=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@ -792,3 +792,5 @@ __SYSCALL(__NR_renameat2, sys_renameat2)
 __SYSCALL(__NR_getrandom, sys_getrandom)
 #define __NR_memfd_create 385
 __SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 386
+__SYSCALL(__NR_bpf, sys_bpf)
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@ -528,7 +528,7 @@ static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index)
 	if (WARN_ON_ONCE(!index))
 		return -EINVAL;

-	if (state->type == PSCI_POWER_STATE_TYPE_STANDBY)
+	if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
 		ret = psci_ops.cpu_suspend(state[index - 1], 0);
 	else
 		ret = __cpu_suspend(index, psci_suspend_finisher);
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>


-#define NR_syscalls		354
+#define NR_syscalls		355

 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@ -359,5 +359,6 @@
 #define __NR_renameat2		351
 #define __NR_getrandom		352
 #define __NR_memfd_create	353
+#define __NR_bpf		354

 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@ -374,4 +374,5 @@ ENTRY(sys_call_table)
 	.long sys_renameat2
 	.long sys_getrandom
 	.long sys_memfd_create
+	.long sys_bpf

--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@ -93,6 +93,15 @@ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 KBUILD_AFLAGS_MODULE		+= -mlong-calls
 KBUILD_CFLAGS_MODULE		+= -mlong-calls

+#
+# pass -msoft-float to GAS if it supports it.  However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+	cflags-y		+= -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
+
 cflags-y += -ffreestanding

 #
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@ -809,6 +809,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = {
 	.irq_set_type = octeon_irq_ciu_gpio_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+	.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
 #endif
 	.flags = IRQCHIP_SET_TYPE_MASKED,
 };
@ -823,6 +824,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio = {
 	.irq_set_type = octeon_irq_ciu_gpio_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity = octeon_irq_ciu_set_affinity,
+	.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
 #endif
 	.flags = IRQCHIP_SET_TYPE_MASKED,
 };
--- a/arch/mips/include/asm/asmmacro-32.h
+++ b/arch/mips/include/asm/asmmacro-32.h
@ -13,6 +13,8 @@
 #include <asm/mipsregs.h>

 	.macro	fpu_save_single thread tmp=t0
+	.set push
+	SET_HARDFLOAT
 	cfc1	\tmp,  fcr31
 	swc1	$f0,  THREAD_FPR0_LS64(\thread)
 	swc1	$f1,  THREAD_FPR1_LS64(\thread)
@ -47,9 +49,12 @@
 	swc1	$f30, THREAD_FPR30_LS64(\thread)
 	swc1	$f31, THREAD_FPR31_LS64(\thread)
 	sw	\tmp, THREAD_FCR31(\thread)
+	.set pop
 	.endm

 	.macro	fpu_restore_single thread tmp=t0
+	.set push
+	SET_HARDFLOAT
 	lw	\tmp, THREAD_FCR31(\thread)
 	lwc1	$f0,  THREAD_FPR0_LS64(\thread)
 	lwc1	$f1,  THREAD_FPR1_LS64(\thread)
@ -84,6 +89,7 @@
 	lwc1	$f30, THREAD_FPR30_LS64(\thread)
 	lwc1	$f31, THREAD_FPR31_LS64(\thread)
 	ctc1	\tmp, fcr31
+	.set pop
 	.endm

 	.macro	cpu_save_nonscratch thread
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@ -57,6 +57,8 @@
 #endif /* CONFIG_CPU_MIPSR2 */

 	.macro	fpu_save_16even thread tmp=t0
+	.set	push
+	SET_HARDFLOAT
 	cfc1	\tmp, fcr31
 	sdc1	$f0,  THREAD_FPR0_LS64(\thread)
 	sdc1	$f2,  THREAD_FPR2_LS64(\thread)
@ -75,11 +77,13 @@
 	sdc1	$f28, THREAD_FPR28_LS64(\thread)
 	sdc1	$f30, THREAD_FPR30_LS64(\thread)
 	sw	\tmp, THREAD_FCR31(\thread)
+	.set	pop
 	.endm

 	.macro	fpu_save_16odd thread
 	.set	push
 	.set	mips64r2
+	SET_HARDFLOAT
 	sdc1	$f1,  THREAD_FPR1_LS64(\thread)
 	sdc1	$f3,  THREAD_FPR3_LS64(\thread)
 	sdc1	$f5,  THREAD_FPR5_LS64(\thread)
@ -110,6 +114,8 @@
 	.endm

 	.macro	fpu_restore_16even thread tmp=t0
+	.set	push
+	SET_HARDFLOAT
 	lw	\tmp, THREAD_FCR31(\thread)
 	ldc1	$f0,  THREAD_FPR0_LS64(\thread)
 	ldc1	$f2,  THREAD_FPR2_LS64(\thread)
@ -133,6 +139,7 @@
 	.macro	fpu_restore_16odd thread
 	.set	push
 	.set	mips64r2
+	SET_HARDFLOAT
 	ldc1	$f1,  THREAD_FPR1_LS64(\thread)
 	ldc1	$f3,  THREAD_FPR3_LS64(\thread)
 	ldc1	$f5,  THREAD_FPR5_LS64(\thread)
@ -277,6 +284,7 @@
 	.macro	cfcmsa	rd, cs
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	.insn
 	.word	CFC_MSA_INSN | (\cs << 11)
 	move	\rd, $1
@ -286,6 +294,7 @@
 	.macro	ctcmsa	cd, rs
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	move	$1, \rs
 	.word	CTC_MSA_INSN | (\cd << 6)
 	.set	pop
@ -294,6 +303,7 @@
 	.macro	ld_d	wd, off, base
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	add	$1, \base, \off
 	.word	LDD_MSA_INSN | (\wd << 6)
 	.set	pop
@ -302,6 +312,7 @@
 	.macro	st_d	wd, off, base
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	add	$1, \base, \off
 	.word	STD_MSA_INSN | (\wd << 6)
 	.set	pop
@ -310,6 +321,7 @@
 	.macro	copy_u_w	rd, ws, n
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	.insn
 	.word	COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
 	/* move triggers an assembler bug... */
@ -320,6 +332,7 @@
 	.macro	copy_u_d	rd, ws, n
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	.insn
 	.word	COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
 	/* move triggers an assembler bug... */
@ -330,6 +343,7 @@
 	.macro	insert_w	wd, n, rs
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	/* move triggers an assembler bug... */
 	or	$1, \rs, zero
 	.word	INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
@ -339,6 +353,7 @@
 	.macro	insert_d	wd, n, rs
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	/* move triggers an assembler bug... */
 	or	$1, \rs, zero
 	.word	INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
@ -381,6 +396,7 @@
 	st_d	31, THREAD_FPR31, \thread
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	cfcmsa	$1, MSA_CSR
 	sw	$1, THREAD_MSA_CSR(\thread)
 	.set	pop
@ -389,6 +405,7 @@
 	.macro	msa_restore_all	thread
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	lw	$1, THREAD_MSA_CSR(\thread)
 	ctcmsa	MSA_CSR, $1
 	.set	pop
@ -441,6 +458,7 @@
 	.macro	msa_init_all_upper
 	.set	push
 	.set	noat
+	SET_HARDFLOAT
 	not	$1, zero
 	msa_init_upper	0
 	.set	pop
--- a/arch/mips/include/asm/fpregdef.h
+++ b/arch/mips/include/asm/fpregdef.h
@ -14,6 +14,20 @@

 #include <asm/sgidefs.h>

+/*
+ * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
+ * hardfloat and softfloat object files.  The kernel build uses soft-float by
+ * default, so we also need to pass -msoft-float along to GAS if it supports it.
+ * But this in turn causes assembler errors in files which access hardfloat
+ * registers.  We detect if GAS supports "-msoft-float" in the Makefile and
+ * explicitly put ".set hardfloat" where floating point registers are touched.
+ */
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define SET_HARDFLOAT .set hardfloat
+#else
+#define SET_HARDFLOAT
+#endif
+
 #if _MIPS_SIM == _MIPS_SIM_ABI32

 /*
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@ -145,8 +145,8 @@ static inline void lose_fpu(int save)
 	if (is_msa_enabled()) {
 		if (save) {
 			save_msa(current);
-			asm volatile("cfc1 %0, $31"
-				: "=r"(current->thread.fpu.fcr31));
+			current->thread.fpu.fcr31 =
+					read_32bit_cp1_register(CP1_STATUS);
 		}
 		disable_msa();
 		clear_thread_flag(TIF_USEDMSA);
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@ -1324,7 +1324,7 @@ do {									\
 /*
 * Macros to access the floating point coprocessor control registers
 */
-#define read_32bit_cp1_register(source)					\
+#define _read_32bit_cp1_register(source, gas_hardfloat)			\
 ({									\
 	int __res;							\
 									\
@ -1334,12 +1334,21 @@ do {									\
 	"	# gas fails to assemble cfc1 for some archs,	\n"	\
 	"	# like Octeon.					\n"	\
 	"	.set	mips1					\n"	\
+	"	"STR(gas_hardfloat)"				\n"	\
 	"	cfc1	%0,"STR(source)"			\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__res));						\
 	__res;								\
 })

+#ifdef GAS_HAS_SET_HARDFLOAT
+#define read_32bit_cp1_register(source)					\
+	_read_32bit_cp1_register(source, .set hardfloat)
+#else
+#define read_32bit_cp1_register(source)					\
+	_read_32bit_cp1_register(source, )
+#endif
+
 #ifdef HAVE_AS_DSP
 #define rddsp(mask)							\
 ({									\
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@ -375,16 +375,17 @@
 #define __NR_seccomp			(__NR_Linux + 352)
 #define __NR_getrandom			(__NR_Linux + 353)
 #define __NR_memfd_create		(__NR_Linux + 354)
+#define __NR_bpf			(__NR_Linux + 355)

 /*
 * Offset of the last Linux o32 flavoured syscall
 */
-#define __NR_Linux_syscalls		354
+#define __NR_Linux_syscalls		355

 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */

 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		354
+#define __NR_O32_Linux_syscalls		355

 #if _MIPS_SIM == _MIPS_SIM_ABI64

@ -707,16 +708,17 @@
 #define __NR_seccomp			(__NR_Linux + 312)
 #define __NR_getrandom			(__NR_Linux + 313)
 #define __NR_memfd_create		(__NR_Linux + 314)
+#define __NR_bpf			(__NR_Linux + 315)

 /*
 * Offset of the last Linux 64-bit flavoured syscall
 */
-#define __NR_Linux_syscalls		314
+#define __NR_Linux_syscalls		315

 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */

 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		314
+#define __NR_64_Linux_syscalls		315

 #if _MIPS_SIM == _MIPS_SIM_NABI32

@ -1043,15 +1045,16 @@
 #define __NR_seccomp			(__NR_Linux + 316)
 #define __NR_getrandom			(__NR_Linux + 317)
 #define __NR_memfd_create		(__NR_Linux + 318)
+#define __NR_memfd_create		(__NR_Linux + 319)

 /*
 * Offset of the last N32 flavoured syscall
 */
-#define __NR_Linux_syscalls		318
+#define __NR_Linux_syscalls		319

 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */

 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		318
+#define __NR_N32_Linux_syscalls		319

 #endif /* _UAPI_ASM_UNISTD_H */
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		case mm_bc1t_op:
 			preempt_disable();
 			if (is_fpu_owner())
-				asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+			        fcr31 = read_32bit_cp1_register(CP1_STATUS);
 			else
 				fcr31 = current->thread.fpu.fcr31;
 			preempt_enable();
@ -562,11 +562,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 	case cop1_op:
 		preempt_disable();
 		if (is_fpu_owner())
-			asm volatile(
-				".set push\n"
-				"\t.set mips1\n"
-				"\tcfc1\t%0,$31\n"
-				"\t.set pop" : "=r" (fcr31));
+		        fcr31 = read_32bit_cp1_register(CP1_STATUS);
 		else
 			fcr31 = current->thread.fpu.fcr31;
 		preempt_enable();
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@ -358,6 +358,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.set	push
 	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
 	.set	mips1
+	SET_HARDFLOAT
 	cfc1	a1, fcr31
 	li	a2, ~(0x3f << 12)
 	and	a2, a1
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@ -28,6 +28,8 @@
 	.set	mips1
 	/* Save floating point context */
 LEAF(_save_fp_context)
+	.set	push
+	SET_HARDFLOAT
 	li	v0, 0					# assume success
 	cfc1	t1,fcr31
 	EX(swc1 $f0,(SC_FPREGS+0)(a0))
@ -65,6 +67,7 @@ LEAF(_save_fp_context)
 	EX(sw	t1,(SC_FPC_CSR)(a0))
 	cfc1	t0,$0				# implementation/version
 	jr	ra
+	.set	pop
 	.set	nomacro
 	 EX(sw	t0,(SC_FPC_EIR)(a0))
 	.set	macro
@ -80,6 +83,8 @@ LEAF(_save_fp_context)
 * stack frame which might have been changed by the user.
 */
 LEAF(_restore_fp_context)
+	.set	push
+	SET_HARDFLOAT
 	li	v0, 0					# assume success
 	EX(lw t0,(SC_FPC_CSR)(a0))
 	EX(lwc1 $f0,(SC_FPREGS+0)(a0))
@ -116,6 +121,7 @@ LEAF(_restore_fp_context)
 	EX(lwc1 $f31,(SC_FPREGS+248)(a0))
 	jr	ra
 	 ctc1	t0,fcr31
+	.set	pop
 	END(_restore_fp_context)
 	.set	reorder

--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@ -120,6 +120,9 @@ LEAF(_restore_fp)

 #define FPU_DEFAULT  0x00000000

+	.set push
+	SET_HARDFLOAT
+
 LEAF(_init_fpu)
 	mfc0	t0, CP0_STATUS
 	li	t1, ST0_CU1
@ -165,3 +168,5 @@ LEAF(_init_fpu)
 	mtc1	t0, $f31
 	jr	ra
 	END(_init_fpu)
+
+	.set pop
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@ -19,8 +19,12 @@
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>

+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
 	.macro	EX insn, reg, src
 	.set	push
+	SET_HARDFLOAT
 	.set	nomacro
 .ex\@:	\insn	\reg, \src
 	.set	pop
@ -33,12 +37,17 @@
 	.set	arch=r4000

 LEAF(_save_fp_context)
+	.set	push
+	SET_HARDFLOAT
 	cfc1	t1, fcr31
+	.set	pop

 #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
 	.set	push
+	SET_HARDFLOAT
 #ifdef CONFIG_CPU_MIPS32_R2
-	.set	mips64r2
+	.set	mips32r2
+	.set	fp=64
 	mfc0	t0, CP0_STATUS
 	sll	t0, t0, 5
 	bgez	t0, 1f			# skip storing odd if FR=0
@ -64,6 +73,8 @@ LEAF(_save_fp_context)
 1:	.set	pop
 #endif

+	.set push
+	SET_HARDFLOAT
 	/* Store the 16 even double precision registers */
 	EX	sdc1 $f0, SC_FPREGS+0(a0)
 	EX	sdc1 $f2, SC_FPREGS+16(a0)
@ -84,11 +95,14 @@ LEAF(_save_fp_context)
 	EX	sw t1, SC_FPC_CSR(a0)
 	jr	ra
 	 li	v0, 0					# success
+	.set pop
 	END(_save_fp_context)

 #ifdef CONFIG_MIPS32_COMPAT
 	/* Save 32-bit process floating point context */
 LEAF(_save_fp_context32)
+	.set push
+	SET_HARDFLOAT
 	cfc1	t1, fcr31

 	mfc0	t0, CP0_STATUS
@ -134,6 +148,7 @@ LEAF(_save_fp_context32)
 	EX	sw t1, SC32_FPC_CSR(a0)
 	cfc1	t0, $0				# implementation/version
 	EX	sw t0, SC32_FPC_EIR(a0)
+	.set pop

 	jr	ra
 	 li	v0, 0					# success
@ -150,8 +165,10 @@ LEAF(_restore_fp_context)

 #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
 	.set	push
+	SET_HARDFLOAT
 #ifdef CONFIG_CPU_MIPS32_R2
-	.set	mips64r2
+	.set	mips32r2
+	.set	fp=64
 	mfc0	t0, CP0_STATUS
 	sll	t0, t0, 5
 	bgez	t0, 1f			# skip loading odd if FR=0
@ -175,6 +192,8 @@ LEAF(_restore_fp_context)
 	EX	ldc1 $f31, SC_FPREGS+248(a0)
 1:	.set pop
 #endif
+	.set push
+	SET_HARDFLOAT
 	EX	ldc1 $f0, SC_FPREGS+0(a0)
 	EX	ldc1 $f2, SC_FPREGS+16(a0)
 	EX	ldc1 $f4, SC_FPREGS+32(a0)
@ -192,6 +211,7 @@ LEAF(_restore_fp_context)
 	EX	ldc1 $f28, SC_FPREGS+224(a0)
 	EX	ldc1 $f30, SC_FPREGS+240(a0)
 	ctc1	t1, fcr31
+	.set pop
 	jr	ra
 	 li	v0, 0					# success
 	END(_restore_fp_context)
@ -199,6 +219,8 @@ LEAF(_restore_fp_context)
 #ifdef CONFIG_MIPS32_COMPAT
 LEAF(_restore_fp_context32)
 	/* Restore an o32 sigcontext.  */
+	.set push
+	SET_HARDFLOAT
 	EX	lw t1, SC32_FPC_CSR(a0)

 	mfc0	t0, CP0_STATUS
@ -242,6 +264,7 @@ LEAF(_restore_fp_context32)
 	ctc1	t1, fcr31
 	jr	ra
 	 li	v0, 0					# success
+	.set pop
 	END(_restore_fp_context32)
 #endif

--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@ -22,6 +22,9 @@

 #include <asm/asmmacro.h>

+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
 /*
 * Offset to the current process status flags, the first 32 bytes of the
 * stack are not used.
@ -65,8 +68,12 @@
 	bgtz	a3, 1f

 	/* Save 128b MSA vector context + scalar FP control & status. */
+	.set push
+	SET_HARDFLOAT
 	cfc1	t1, fcr31
 	msa_save_all	a0
+	.set pop	/* SET_HARDFLOAT */
+
 	sw	t1, THREAD_FCR31(a0)
 	b	2f

@ -161,6 +168,9 @@ LEAF(_init_msa_upper)

 #define FPU_DEFAULT  0x00000000

+	.set push
+	SET_HARDFLOAT
+
 LEAF(_init_fpu)
 	mfc0	t0, CP0_STATUS
 	li	t1, ST0_CU1
@ -232,7 +242,8 @@ LEAF(_init_fpu)

 #ifdef CONFIG_CPU_MIPS32_R2
 	.set    push
-	.set    mips64r2
+	.set    mips32r2
+	.set	fp=64
 	sll     t0, t0, 5			# is Status.FR set?
 	bgez    t0, 1f				# no: skip setting upper 32b

@ -291,3 +302,5 @@ LEAF(_init_fpu)
 #endif
 	jr	ra
 	END(_init_fpu)
+
+	.set pop	/* SET_HARDFLOAT */
--- a/arch/mips/kernel/r6000_fpu.S
+++ b/arch/mips/kernel/r6000_fpu.S
@ -18,6 +18,9 @@

 	.set	noreorder
 	.set	mips2
+	.set	push
+	SET_HARDFLOAT
+
 	/* Save floating point context */
 	LEAF(_save_fp_context)
 	mfc0	t0,CP0_STATUS
@ -85,3 +88,5 @@
 1:	jr	ra
 	 nop
 	END(_restore_fp_context)
+
+	.set pop	/* SET_HARDFLOAT */
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@ -579,3 +579,4 @@ EXPORT(sys_call_table)
 	PTR	sys_seccomp
 	PTR	sys_getrandom
 	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 4355 */
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@ -434,4 +434,5 @@ EXPORT(sys_call_table)
 	PTR	sys_seccomp
 	PTR	sys_getrandom
 	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 5315 */
 	.size	sys_call_table,.-sys_call_table
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@ -427,4 +427,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_seccomp
 	PTR	sys_getrandom
 	PTR	sys_memfd_create
+	PTR	sys_bpf
 	.size	sysn32_call_table,.-sysn32_call_table
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@ -564,4 +564,5 @@ EXPORT(sys32_call_table)
 	PTR	sys_seccomp
 	PTR	sys_getrandom
 	PTR	sys_memfd_create
+	PTR	sys_bpf				/* 4355 */
 	.size	sys32_call_table,.-sys32_call_table
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@ -683,7 +683,8 @@ static void __init arch_mem_init(char **cmdline_p)
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
 	/* Tell bootmem about cma reserved memblock section */
 	for_each_memblock(reserved, reg)
-		reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+		if (reg->size != 0)
+			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
 }

 static void __init resource_init(void)
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@ -34,7 +34,7 @@ static void dump_tlb(int first, int last)
 		entrylo0 = read_c0_entrylo0();

 		/* Unused entries have a virtual address of KSEG0.  */
-		if ((entryhi & 0xffffe000) != 0x80000000
+		if ((entryhi & 0xfffff000) != 0x80000000
 		    && (entryhi & 0xfc0) == asid) {
 			/*
 			 * Only print entries in use
@ -43,7 +43,7 @@ static void dump_tlb(int first, int last)

 			printk("va=%08lx asid=%08lx"
 			       "  [pa=%06lx n=%d d=%d v=%d g=%d]",
-			       (entryhi & 0xffffe000),
+			       (entryhi & 0xfffff000),
 			       entryhi & 0xfc0,
 			       entrylo0 & PAGE_MASK,
 			       (entrylo0 & (1 << 11)) ? 1 : 0,
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@ -40,9 +40,11 @@ FEXPORT(__strnlen_\func\()_nocheck_asm)
 .else
 	EX(lbe, t0, (v0), .Lfault\@)
 .endif
-	PTR_ADDIU	v0, 1
+	.set		noreorder
 	bnez		t0, 1b
-1:	PTR_SUBU	v0, a0
+1:	 PTR_ADDIU	v0, 1
+	.set		reorder
+	PTR_SUBU	v0, a0
 	jr		ra
 	END(__strnlen_\func\()_asm)

--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@ -584,11 +584,7 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		if (insn.i_format.rs == bc_op) {
 			preempt_disable();
 			if (is_fpu_owner())
-				asm volatile(
-					".set push\n"
-					"\t.set mips1\n"
-					"\tcfc1\t%0,$31\n"
-					"\t.set pop" : "=r" (fcr31));
+			        fcr31 = read_32bit_cp1_register(CP1_STATUS);
 			else
 				fcr31 = current->thread.fpu.fcr31;
 			preempt_enable();
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;

 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0)
 		return ret;
-	}

 	write_msi_msg(xirq, &msg);
 	return 0;
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@ -70,39 +70,39 @@
 #define CPU_UNKNOWN		(~((u32)0))

 /* Utility macros */
-#define SKIP_TO_NEXT_CPU(reg_entry)			\
-({							\
-	while (reg_entry->reg_id != REG_ID("CPUEND"))	\
-		reg_entry++;				\
-	reg_entry++;					\
+#define SKIP_TO_NEXT_CPU(reg_entry)					\
+({									\
+	while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND"))	\
+		reg_entry++;						\
+	reg_entry++;							\
 })

 /* Kernel Dump section info */
 struct fadump_section {
-	u32	request_flag;
-	u16	source_data_type;
-	u16	error_flags;
-	u64	source_address;
-	u64	source_len;
-	u64	bytes_dumped;
-	u64	destination_address;
+	__be32	request_flag;
+	__be16	source_data_type;
+	__be16	error_flags;
+	__be64	source_address;
+	__be64	source_len;
+	__be64	bytes_dumped;
+	__be64	destination_address;
 };

 /* ibm,configure-kernel-dump header. */
 struct fadump_section_header {
-	u32	dump_format_version;
-	u16	dump_num_sections;
-	u16	dump_status_flag;
-	u32	offset_first_dump_section;
+	__be32	dump_format_version;
+	__be16	dump_num_sections;
+	__be16	dump_status_flag;
+	__be32	offset_first_dump_section;

 	/* Fields for disk dump option. */
-	u32	dd_block_size;
-	u64	dd_block_offset;
-	u64	dd_num_blocks;
-	u32	dd_offset_disk_path;
+	__be32	dd_block_size;
+	__be64	dd_block_offset;
+	__be64	dd_num_blocks;
+	__be32	dd_offset_disk_path;

 	/* Maximum time allowed to prevent an automatic dump-reboot. */
-	u32	max_time_auto;
+	__be32	max_time_auto;
 };

 /*
@ -174,15 +174,15 @@ static inline u64 str_to_u64(const char *str)

 /* Register save area header. */
 struct fadump_reg_save_area_header {
-	u64		magic_number;
-	u32		version;
-	u32		num_cpu_offset;
+	__be64		magic_number;
+	__be32		version;
+	__be32		num_cpu_offset;
 };

 /* Register entry. */
 struct fadump_reg_entry {
-	u64		reg_id;
-	u64		reg_value;
+	__be64		reg_id;
+	__be64		reg_value;
 };

 /* fadump crash info structure */
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@ -659,7 +659,13 @@ _GLOBAL(ret_from_except_lite)
 3:
 #endif
 	bl	save_nvgprs
+	/*
+	 * Use a non volatile GPR to save and restore our thread_info flags
+	 * across the call to restore_interrupts.
+	 */
+	mr	r30,r4
 	bl	restore_interrupts
+	mr	r4,r30
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_notify_resume
 	b	ret_from_except
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@ -58,7 +58,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
 	const __be32 *sections;
 	int i, num_sections;
 	int size;
-	const int *token;
+	const __be32 *token;

 	if (depth != 1 || strcmp(uname, "rtas") != 0)
 		return 0;
@ -72,7 +72,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
 		return 1;

 	fw_dump.fadump_supported = 1;
-	fw_dump.ibm_configure_kernel_dump = *token;
+	fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);

 	/*
 	 * The 'ibm,kernel-dump' rtas node is present only if there is
@ -147,11 +147,11 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,
 	memset(fdm, 0, sizeof(struct fadump_mem_struct));
 	addr = addr & PAGE_MASK;

-	fdm->header.dump_format_version = 0x00000001;
-	fdm->header.dump_num_sections = 3;
+	fdm->header.dump_format_version = cpu_to_be32(0x00000001);
+	fdm->header.dump_num_sections = cpu_to_be16(3);
 	fdm->header.dump_status_flag = 0;
 	fdm->header.offset_first_dump_section =
-		(u32)offsetof(struct fadump_mem_struct, cpu_state_data);
+		cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));

 	/*
 	 * Fields for disk dump option.
@ -167,27 +167,27 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,

 	/* Kernel dump sections */
 	/* cpu state data section. */
-	fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
-	fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
+	fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+	fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
 	fdm->cpu_state_data.source_address = 0;
-	fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
-	fdm->cpu_state_data.destination_address = addr;
+	fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
+	fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
 	addr += fw_dump.cpu_state_data_size;

 	/* hpte region section */
-	fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
-	fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
+	fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+	fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
 	fdm->hpte_region.source_address = 0;
-	fdm->hpte_region.source_len = fw_dump.hpte_region_size;
-	fdm->hpte_region.destination_address = addr;
+	fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
+	fdm->hpte_region.destination_address = cpu_to_be64(addr);
 	addr += fw_dump.hpte_region_size;

 	/* RMA region section */
-	fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
-	fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
-	fdm->rmr_region.source_address = RMA_START;
-	fdm->rmr_region.source_len = fw_dump.boot_memory_size;
-	fdm->rmr_region.destination_address = addr;
+	fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+	fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
+	fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
+	fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
+	fdm->rmr_region.destination_address = cpu_to_be64(addr);
 	addr += fw_dump.boot_memory_size;

 	return addr;
@ -272,7 +272,7 @@ int __init fadump_reserve_mem(void)
 	 * first kernel.
 	 */
 	if (fdm_active)
-		fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
+		fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
 	else
 		fw_dump.boot_memory_size = fadump_calculate_reserve_size();

@ -314,8 +314,8 @@ int __init fadump_reserve_mem(void)
 				(unsigned long)(base >> 20));

 		fw_dump.fadumphdr_addr =
-				fdm_active->rmr_region.destination_address +
-				fdm_active->rmr_region.source_len;
+				be64_to_cpu(fdm_active->rmr_region.destination_address) +
+				be64_to_cpu(fdm_active->rmr_region.source_len);
 		pr_debug("fadumphdr_addr = %p\n",
 				(void *) fw_dump.fadumphdr_addr);
 	} else {
@ -472,9 +472,9 @@ fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs)
 {
 	memset(regs, 0, sizeof(struct pt_regs));

-	while (reg_entry->reg_id != REG_ID("CPUEND")) {
-		fadump_set_regval(regs, reg_entry->reg_id,
-					reg_entry->reg_value);
+	while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
+		fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
+					be64_to_cpu(reg_entry->reg_value));
 		reg_entry++;
 	}
 	reg_entry++;
@ -603,20 +603,20 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
 	if (!fdm->cpu_state_data.bytes_dumped)
 		return -EINVAL;

-	addr = fdm->cpu_state_data.destination_address;
+	addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
 	vaddr = __va(addr);

 	reg_header = vaddr;
-	if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
+	if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
 		printk(KERN_ERR "Unable to read register save area.\n");
 		return -ENOENT;
 	}
 	pr_debug("--------CPU State Data------------\n");
-	pr_debug("Magic Number: %llx\n", reg_header->magic_number);
-	pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
+	pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
+	pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));

-	vaddr += reg_header->num_cpu_offset;
-	num_cpus = *((u32 *)(vaddr));
+	vaddr += be32_to_cpu(reg_header->num_cpu_offset);
+	num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
 	pr_debug("NumCpus     : %u\n", num_cpus);
 	vaddr += sizeof(u32);
 	reg_entry = (struct fadump_reg_entry *)vaddr;
@ -639,13 +639,13 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
 		fdh = __va(fw_dump.fadumphdr_addr);

 	for (i = 0; i < num_cpus; i++) {
-		if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
+		if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
 			printk(KERN_ERR "Unable to read CPU state data\n");
 			rc = -ENOENT;
 			goto error_out;
 		}
 		/* Lower 4 bytes of reg_value contains logical cpu id */
-		cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
+		cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
 		if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
 			SKIP_TO_NEXT_CPU(reg_entry);
 			continue;
@ -692,7 +692,7 @@ static int __init process_fadump(const struct fadump_mem_struct *fdm_active)
 		return -EINVAL;

 	/* Check if the dump data is valid. */
-	if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
+	if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
 			(fdm_active->cpu_state_data.error_flags != 0) ||
 			(fdm_active->rmr_region.error_flags != 0)) {
 		printk(KERN_ERR "Dump taken by platform is not valid\n");
@ -828,7 +828,7 @@ static void fadump_setup_crash_memory_ranges(void)
 static inline unsigned long fadump_relocate(unsigned long paddr)
 {
 	if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
-		return fdm.rmr_region.destination_address + paddr;
+		return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
 	else
 		return paddr;
 }
@ -902,7 +902,7 @@ static int fadump_create_elfcore_headers(char *bufp)
 			 * to the specified destination_address. Hence set
 			 * the correct offset.
 			 */
-			phdr->p_offset = fdm.rmr_region.destination_address;
+			phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
 		}

 		phdr->p_paddr = mbase;
@ -951,7 +951,7 @@ static void register_fadump(void)

 	fadump_setup_crash_memory_ranges();

-	addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
+	addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
 	/* Initialize fadump crash info header. */
 	addr = init_fadump_header(addr);
 	vaddr = __va(addr);
@ -1023,7 +1023,7 @@ void fadump_cleanup(void)
 	/* Invalidate the registration only if dump is active. */
 	if (fw_dump.dump_active) {
 		init_fadump_mem_struct(&fdm,
-			fdm_active->cpu_state_data.destination_address);
+			be64_to_cpu(fdm_active->cpu_state_data.destination_address));
 		fadump_invalidate_dump(&fdm);
 	}
 }
@ -1063,7 +1063,7 @@ static void fadump_invalidate_release_mem(void)
 		return;
 	}

-	destination_address = fdm_active->cpu_state_data.destination_address;
+	destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
 	fadump_cleanup();
 	mutex_unlock(&fadump_mutex);

@ -1183,31 +1183,31 @@ static int fadump_region_show(struct seq_file *m, void *private)
 	seq_printf(m,
 			"CPU : [%#016llx-%#016llx] %#llx bytes, "
 			"Dumped: %#llx\n",
-			fdm_ptr->cpu_state_data.destination_address,
-			fdm_ptr->cpu_state_data.destination_address +
-			fdm_ptr->cpu_state_data.source_len - 1,
-			fdm_ptr->cpu_state_data.source_len,
-			fdm_ptr->cpu_state_data.bytes_dumped);
+			be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
+			be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
+			be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
+			be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
+			be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
 	seq_printf(m,
 			"HPTE: [%#016llx-%#016llx] %#llx bytes, "
 			"Dumped: %#llx\n",
-			fdm_ptr->hpte_region.destination_address,
-			fdm_ptr->hpte_region.destination_address +
-			fdm_ptr->hpte_region.source_len - 1,
-			fdm_ptr->hpte_region.source_len,
-			fdm_ptr->hpte_region.bytes_dumped);
+			be64_to_cpu(fdm_ptr->hpte_region.destination_address),
+			be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
+			be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
+			be64_to_cpu(fdm_ptr->hpte_region.source_len),
+			be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
 	seq_printf(m,
 			"DUMP: [%#016llx-%#016llx] %#llx bytes, "
 			"Dumped: %#llx\n",
-			fdm_ptr->rmr_region.destination_address,
-			fdm_ptr->rmr_region.destination_address +
-			fdm_ptr->rmr_region.source_len - 1,
-			fdm_ptr->rmr_region.source_len,
-			fdm_ptr->rmr_region.bytes_dumped);
+			be64_to_cpu(fdm_ptr->rmr_region.destination_address),
+			be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
+			be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
+			be64_to_cpu(fdm_ptr->rmr_region.source_len),
+			be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));

 	if (!fdm_active ||
 		(fw_dump.reserve_dump_area_start ==
-		fdm_ptr->cpu_state_data.destination_address))
+		be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
 		goto out;

 	/* Dump is active. Show reserved memory region. */
@ -1215,10 +1215,10 @@ static int fadump_region_show(struct seq_file *m, void *private)
 			"    : [%#016llx-%#016llx] %#llx bytes, "
 			"Dumped: %#llx\n",
 			(unsigned long long)fw_dump.reserve_dump_area_start,
-			fdm_ptr->cpu_state_data.destination_address - 1,
-			fdm_ptr->cpu_state_data.destination_address -
+			be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
+			be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
 			fw_dump.reserve_dump_area_start,
-			fdm_ptr->cpu_state_data.destination_address -
+			be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
 			fw_dump.reserve_dump_area_start);
 out:
 	if (fdm_active)
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@ -103,7 +103,7 @@ unsigned long __max_low_memory = MAX_LOW_MEM;
 /*
 * Check for command-line options that affect what MMU_init will do.
 */
-void MMU_setup(void)
+void __init MMU_setup(void)
 {
 	/* Check for nobats option (used in mapin_ram). */
 	if (strstr(boot_command_line, "nobats")) {
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@ -216,14 +216,54 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
 				   &data, len);
 		if (rc)
 			return -ENXIO;
+
+		/*
+		 * Now there is some trickery with the data returned by OPAL
+		 * as it's the desired data right justified in a 32-bit BE
+		 * word.
+		 *
+		 * This is a very bad interface and I'm to blame for it :-(
+		 *
+		 * So we can't just apply a 32-bit swap to what comes from OPAL,
+		 * because user space expects the *bytes* to be in their proper
+		 * respective positions (ie, LPC position).
+		 *
+		 * So what we really want to do here is to shift data right
+		 * appropriately on a LE kernel.
+		 *
+		 * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+		 * order, we have in memory written to by OPAL at the "data"
+		 * pointer:
+		 *
+		 *               Bytes:      OPAL "data"   LE "data"
+		 *   32-bit:   B0 B1 B2 B3   B0B1B2B3      B3B2B1B0
+		 *   16-bit:   B0 B1         0000B0B1      B1B00000
+		 *    8-bit:   B0            000000B0      B0000000
+		 *
+		 * So a BE kernel will have the leftmost of the above in the MSB
+		 * and rightmost in the LSB and can just then "cast" the u32 "data"
+		 * down to the appropriate quantity and write it.
+		 *
+		 * However, an LE kernel can't. It doesn't need to swap because a
+		 * load from data followed by a store to user are going to preserve
+		 * the byte ordering which is the wire byte order which is what the
+		 * user wants, but in order to "crop" to the right size, we need to
+		 * shift right first.
+		 */
 		switch(len) {
 		case 4:
 			rc = __put_user((u32)data, (u32 __user *)ubuf);
 			break;
 		case 2:
+#ifdef __LITTLE_ENDIAN__
+			data >>= 16;
+#endif
 			rc = __put_user((u16)data, (u16 __user *)ubuf);
 			break;
 		default:
+#ifdef __LITTLE_ENDIAN__
+			data >>= 24;
+#endif
 			rc = __put_user((u8)data, (u8 __user *)ubuf);
 			break;
 		}
@ -263,12 +303,31 @@ static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf,
 			else if (todo > 1 && (pos & 1) == 0)
 				len = 2;
 		}
+
+		/*
+		 * Similarly to the read case, we have some trickery here but
+		 * it's different to handle. We need to pass the value to OPAL in
+		 * a register whose layout depends on the access size. We want
+		 * to reproduce the memory layout of the user, however we aren't
+		 * doing a load from user and a store to another memory location
+		 * which would achieve that. Here we pass the value to OPAL via
+		 * a register which is expected to contain the "BE" interpretation
+		 * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+		 * in the MSB. So here we *do* need to byteswap on LE.
+		 *
+		 *           User bytes:    LE "data"  OPAL "data"
+		 *  32-bit:  B0 B1 B2 B3    B3B2B1B0   B0B1B2B3
+		 *  16-bit:  B0 B1          0000B1B0   0000B0B1
+		 *   8-bit:  B0             000000B0   000000B0
+		 */
 		switch(len) {
 		case 4:
 			rc = __get_user(data, (u32 __user *)ubuf);
+			data = cpu_to_be32(data);
 			break;
 		case 2:
 			rc = __get_user(data, (u16 __user *)ubuf);
+			data = cpu_to_be16(data);
 			break;
 		default:
 			rc = __get_user(data, (u8 __user *)ubuf);
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@ -382,7 +382,7 @@ static int dlpar_online_cpu(struct device_node *dn)
 			BUG_ON(get_cpu_current_state(cpu)
 					!= CPU_STATE_OFFLINE);
 			cpu_maps_update_done();
-			rc = cpu_up(cpu);
+			rc = device_online(get_cpu_device(cpu));
 			if (rc)
 				goto out;
 			cpu_maps_update_begin();
@ -467,7 +467,7 @@ static int dlpar_offline_cpu(struct device_node *dn)
 			if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
 				set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
 				cpu_maps_update_done();
-				rc = cpu_down(cpu);
+				rc = device_offline(get_cpu_device(cpu));
 				if (rc)
 					goto out;
 				cpu_maps_update_begin();
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@ -43,6 +43,7 @@
 #include <asm/trace.h>
 #include <asm/firmware.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/fadump.h>

 #include "pseries.h"

@ -247,8 +248,17 @@ static void pSeries_lpar_hptab_clear(void)
 	}

 #ifdef __LITTLE_ENDIAN__
-	/* Reset exceptions to big endian */
-	if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+	/*
+	 * Reset exceptions to big endian.
+	 *
+	 * FIXME this is a hack for kexec, we need to reset the exception
+	 * endian before starting the new kernel and this is a convenient place
+	 * to do it.
+	 *
+	 * This is also called on boot when a fadump happens. In that case we
+	 * must not change the exception endian mode.
+	 */
+	if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
 		long rc;

 		rc = pseries_big_endian_exceptions();
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
@ -245,6 +244,7 @@ CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@ -252,11 +252,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@ -270,6 +265,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@ -286,9 +282,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@ -374,14 +367,13 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
 CONFIG_SCSI_DEBUG=m
 CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=m
@ -427,7 +419,6 @@ CONFIG_VIRTIO_NET=m
 CONFIG_NLMON=m
 CONFIG_VHOST_NET=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@ -481,14 +472,14 @@ CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_XFS_DEBUG=y
 CONFIG_GFS2_FS=m
 CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
 CONFIG_FANOTIFY=y
@ -574,7 +565,6 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_RT_MUTEX_TESTER=y
 CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCK_STAT=y
@ -600,8 +590,13 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
 CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
 CONFIG_LKDTM=m
 CONFIG_TEST_LIST_SORT=y
 CONFIG_KPROBES_SANITY_TEST=y
@ -609,7 +604,10 @@ CONFIG_RBTREE_TEST=y
 CONFIG_INTERVAL_TREE_TEST=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_STRING_HELPERS=y
+CONFIG_TEST_KSTRTOX=y
 CONFIG_DMA_API_DEBUG=y
+CONFIG_TEST_BPF=m
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
@ -673,12 +671,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m
 CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
 CONFIG_CORDIC=m
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
@ -243,6 +242,7 @@ CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@ -250,11 +250,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@ -268,6 +263,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@ -284,9 +280,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@ -371,14 +364,13 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
 CONFIG_SCSI_DEBUG=m
 CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=m
@ -424,7 +416,6 @@ CONFIG_VIRTIO_NET=m
 CONFIG_NLMON=m
 CONFIG_VHOST_NET=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@ -478,13 +469,13 @@ CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_GFS2_FS=m
 CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
 CONFIG_FANOTIFY=y
@ -626,12 +617,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m
 CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
 CONFIG_CORDIC=m
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@ -33,7 +33,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
@ -241,6 +240,7 @@ CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@ -248,11 +248,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@ -266,6 +261,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@ -282,9 +278,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@ -369,14 +362,13 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
 CONFIG_SCSI_DEBUG=m
 CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=m
@ -422,7 +414,6 @@ CONFIG_VIRTIO_NET=m
 CONFIG_NLMON=m
 CONFIG_VHOST_NET=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@ -476,13 +467,13 @@ CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
 CONFIG_GFS2_FS=m
 CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
 CONFIG_FANOTIFY=y
@ -550,8 +541,11 @@ CONFIG_TIMER_STATS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
 CONFIG_LKDTM=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
@ -618,12 +612,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m
 CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
 CONFIG_CORDIC=m
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@ -22,8 +22,8 @@ CONFIG_HZ_100=y
 CONFIG_CRASH_DUMP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_IUCV is not set
 CONFIG_NET=y
+# CONFIG_IUCV is not set
 CONFIG_ATM=y
 CONFIG_ATM_LANE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@ -36,9 +36,9 @@ CONFIG_ENCLOSURE_SERVICES=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_ENCLOSURE=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SRP_ATTRS=y
 CONFIG_ZFCP=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@ -75,12 +75,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 # CONFIG_FTRACE is not set
 # CONFIG_STRICT_DEVMEM is not set
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
 # CONFIG_PFAULT is not set
 # CONFIG_S390_HYPFS_FS is not set
 # CONFIG_VIRTUALIZATION is not set
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@ -92,10 +92,10 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=y
 CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_NETDEVICES=y
@ -164,14 +164,13 @@ CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@ -121,6 +121,8 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent,
 {
 	struct ftrace_graph_ent trace;

+	if (unlikely(ftrace_graph_is_dead()))
+		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@ -19,6 +19,7 @@
 	.type  __kernel_clock_gettime,@function
 __kernel_clock_gettime:
 	.cfi_startproc
+	ahi	%r15,-16
 	basr	%r5,0
 0:	al	%r5,21f-0b(%r5)			/* get &_vdso_data */
 	chi	%r2,__CLOCK_REALTIME_COARSE
@ -34,8 +35,8 @@ __kernel_clock_gettime:
 1:	l	%r4,__VDSO_UPD_COUNT+4(%r5)	/* load update counter */
 	tml	%r4,0x0001			/* pending update ? loop */
 	jnz	1b
-	stcke	24(%r15)			/* Store TOD clock */
-	lm	%r0,%r1,25(%r15)
+	stcke	0(%r15)				/* Store TOD clock */
+	lm	%r0,%r1,1(%r15)
 	s	%r0,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,2f
@ -70,6 +71,7 @@ __kernel_clock_gettime:
 8:	st	%r2,0(%r3)			/* store tp->tv_sec */
 	st	%r1,4(%r3)			/* store tp->tv_nsec */
 	lhi	%r2,0
+	ahi	%r15,16
 	br	%r14

 	/* CLOCK_MONOTONIC_COARSE */
@ -96,8 +98,8 @@ __kernel_clock_gettime:
 11:	l	%r4,__VDSO_UPD_COUNT+4(%r5)	/* load update counter */
 	tml	%r4,0x0001			/* pending update ? loop */
 	jnz	11b
-	stcke	24(%r15)			/* Store TOD clock */
-	lm	%r0,%r1,25(%r15)
+	stcke	0(%r15)				/* Store TOD clock */
+	lm	%r0,%r1,1(%r15)
 	s	%r0,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,12f
@ -132,11 +134,13 @@ __kernel_clock_gettime:
 17:	st	%r2,0(%r3)			/* store tp->tv_sec */
 	st	%r1,4(%r3)			/* store tp->tv_nsec */
 	lhi	%r2,0
+	ahi	%r15,16
 	br	%r14

 	/* Fallback to system call */
 19:	lhi	%r1,__NR_clock_gettime
 	svc	0
+	ahi	%r15,16
 	br	%r14

 20:	.long	1000000000
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@ -19,6 +19,7 @@
 	.type  __kernel_gettimeofday,@function
 __kernel_gettimeofday:
 	.cfi_startproc
+	ahi	%r15,-16
 	basr	%r5,0
 0:	al	%r5,13f-0b(%r5)			/* get &_vdso_data */
 1:	ltr	%r3,%r3				/* check if tz is NULL */
@ -29,30 +30,30 @@ __kernel_gettimeofday:
 	l	%r4,__VDSO_UPD_COUNT+4(%r5)	/* load update counter */
 	tml	%r4,0x0001			/* pending update ? loop */
 	jnz	1b
-	stcke	24(%r15)			/* Store TOD clock */
-	lm	%r0,%r1,25(%r15)
+	stcke	0(%r15)				/* Store TOD clock */
+	lm	%r0,%r1,1(%r15)
 	s	%r0,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,3f
 	ahi	%r0,-1
 3:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
-	st	%r0,24(%r15)
+	st	%r0,0(%r15)
 	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	4f
 	a	%r0,__VDSO_TK_MULT(%r5)
-4:	al	%r0,24(%r15)
+4:	al	%r0,0(%r15)
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,5f
 	ahi	%r0,1
-5:	mvc	24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
+5:	mvc	0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	1b
 	l	%r4,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
 	srdl	%r0,0(%r4)			/*  >> tk->shift */
-	l	%r4,24(%r15)			/* get tv_sec from stack */
+	l	%r4,0(%r15)			/* get tv_sec from stack */
 	basr	%r5,0
 6:	ltr	%r0,%r0
 	jnz	7f
@ -71,6 +72,7 @@ __kernel_gettimeofday:
 9:	srl	%r0,6
 	st	%r0,4(%r2)			/* store tv->tv_usec */
 10:	slr	%r2,%r2
+	ahi	%r15,16
 	br	%r14
 11:	.long	1000000000
 12:	.long	274877907
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@ -19,6 +19,7 @@
 	.type  __kernel_clock_gettime,@function
 __kernel_clock_gettime:
 	.cfi_startproc
+	aghi	%r15,-16
 	larl	%r5,_vdso_data
 	cghi	%r2,__CLOCK_REALTIME_COARSE
 	je	4f
@ -37,10 +38,10 @@ __kernel_clock_gettime:
 0:	lg	%r4,__VDSO_UPD_COUNT(%r5)	/* load update counter */
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	0b
-	stcke	48(%r15)			/* Store TOD clock */
+	stcke	0(%r15)				/* Store TOD clock */
 	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
 	lg	%r0,__VDSO_WTOM_SEC(%r5)
-	lg	%r1,49(%r15)
+	lg	%r1,1(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	alg	%r1,__VDSO_WTOM_NSEC(%r5)
@ -56,6 +57,7 @@ __kernel_clock_gettime:
 2:	stg	%r0,0(%r3)			/* store tp->tv_sec */
 	stg	%r1,8(%r3)			/* store tp->tv_nsec */
 	lghi	%r2,0
+	aghi	%r15,16
 	br	%r14

 	/* CLOCK_MONOTONIC_COARSE */
@ -82,9 +84,9 @@ __kernel_clock_gettime:
 5:	lg	%r4,__VDSO_UPD_COUNT(%r5)	/* load update counter */
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	5b
-	stcke	48(%r15)			/* Store TOD clock */
+	stcke	0(%r15)				/* Store TOD clock */
 	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
-	lg	%r1,49(%r15)
+	lg	%r1,1(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
@ -101,6 +103,7 @@ __kernel_clock_gettime:
 7:	stg	%r0,0(%r3)			/* store tp->tv_sec */
 	stg	%r1,8(%r3)			/* store tp->tv_nsec */
 	lghi	%r2,0
+	aghi	%r15,16
 	br	%r14

 	/* CLOCK_THREAD_CPUTIME_ID for this thread */
@ -134,11 +137,13 @@ __kernel_clock_gettime:
 	slgr	%r4,%r0				/* r4 = tv_nsec */
 	stg	%r4,8(%r3)
 	lghi	%r2,0
+	aghi	%r15,16
 	br	%r14

 	/* Fallback to system call */
 12:	lghi	%r1,__NR_clock_gettime
 	svc	0
+	aghi	%r15,16
 	br	%r14

 13:	.quad	1000000000
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@ -19,6 +19,7 @@
 	.type  __kernel_gettimeofday,@function
 __kernel_gettimeofday:
 	.cfi_startproc
+	aghi	%r15,-16
 	larl	%r5,_vdso_data
 0:	ltgr	%r3,%r3				/* check if tz is NULL */
 	je	1f
@ -28,8 +29,8 @@ __kernel_gettimeofday:
 	lg	%r4,__VDSO_UPD_COUNT(%r5)	/* load update counter */
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	0b
-	stcke	48(%r15)			/* Store TOD clock */
-	lg	%r1,49(%r15)
+	stcke	0(%r15)				/* Store TOD clock */
+	lg	%r1,1(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
 	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
@ -50,6 +51,7 @@ __kernel_gettimeofday:
 	srlg	%r0,%r0,6
 	stg	%r0,8(%r2)			/* store tv->tv_usec */
 4:	lghi	%r2,0
+	aghi	%r15,16
 	br	%r14
 5:	.quad	1000000000
 	.long	274877907
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@ -66,7 +66,11 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
 	clock = S390_lowcore.last_update_clock;
 	asm volatile(
 		"	stpt	%0\n"	/* Store current cpu timer value */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+		"	stckf	%1"	/* Store current tod clock value */
+#else
 		"	stck	%1"	/* Store current tod clock value */
+#endif
 		: "=m" (S390_lowcore.last_update_timer),
 		  "=m" (S390_lowcore.last_update_clock));
 	S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@ -574,12 +574,14 @@ static inline int assign_eip_far(struct x86_emulate_ctxt *ctxt, ulong dst,
 	case 4:
 		ctxt->_eip = (u32)dst;
 		break;
+#ifdef CONFIG_X86_64
 	case 8:
 		if ((cs_l && is_noncanonical_address(dst)) ||
-		    (!cs_l && (dst & ~(u32)-1)))
+		    (!cs_l && (dst >> 32) != 0))
 			return emulate_gp(ctxt, 0);
 		ctxt->_eip = dst;
 		break;
+#endif
 	default:
 		WARN(1, "unsupported eip assignment size\n");
 	}
@ -641,7 +643,8 @@ static bool insn_aligned(struct x86_emulate_ctxt *ctxt, unsigned size)

 static int __linearize(struct x86_emulate_ctxt *ctxt,
 		     struct segmented_address addr,
-		     unsigned size, bool write, bool fetch,
+		     unsigned *max_size, unsigned size,
+		     bool write, bool fetch,
 		     ulong *linear)
 {
 	struct desc_struct desc;
@ -652,10 +655,15 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 	unsigned cpl;

 	la = seg_base(ctxt, addr.seg) + addr.ea;
+	*max_size = 0;
 	switch (ctxt->mode) {
 	case X86EMUL_MODE_PROT64:
 		if (((signed long)la << 16) >> 16 != la)
 			return emulate_gp(ctxt, 0);
+
+		*max_size = min_t(u64, ~0u, (1ull << 48) - la);
+		if (size > *max_size)
+			goto bad;
 		break;
 	default:
 		usable = ctxt->ops->get_segment(ctxt, &sel, &desc, NULL,
@ -673,20 +681,25 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 		if ((ctxt->mode == X86EMUL_MODE_REAL) && !fetch &&
 		    (ctxt->d & NoBigReal)) {
 			/* la is between zero and 0xffff */
-			if (la > 0xffff || (u32)(la + size - 1) > 0xffff)
+			if (la > 0xffff)
 				goto bad;
+			*max_size = 0x10000 - la;
 		} else if ((desc.type & 8) || !(desc.type & 4)) {
 			/* expand-up segment */
-			if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+			if (addr.ea > lim)
 				goto bad;
+			*max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
 		} else {
 			/* expand-down segment */
-			if (addr.ea <= lim || (u32)(addr.ea + size - 1) <= lim)
+			if (addr.ea <= lim)
 				goto bad;
 			lim = desc.d ? 0xffffffff : 0xffff;
-			if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+			if (addr.ea > lim)
 				goto bad;
+			*max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
 		}
+		if (size > *max_size)
+			goto bad;
 		cpl = ctxt->ops->cpl(ctxt);
 		if (!(desc.type & 8)) {
 			/* data segment */
@ -711,9 +724,9 @@ static int __linearize(struct x86_emulate_ctxt *ctxt,
 	return X86EMUL_CONTINUE;
 bad:
 	if (addr.seg == VCPU_SREG_SS)
-		return emulate_ss(ctxt, sel);
+		return emulate_ss(ctxt, 0);
 	else
-		return emulate_gp(ctxt, sel);
+		return emulate_gp(ctxt, 0);
 }

 static int linearize(struct x86_emulate_ctxt *ctxt,
@ -721,7 +734,8 @@ static int linearize(struct x86_emulate_ctxt *ctxt,
 		     unsigned size, bool write,
 		     ulong *linear)
 {
-	return __linearize(ctxt, addr, size, write, false, linear);
+	unsigned max_size;
+	return __linearize(ctxt, addr, &max_size, size, write, false, linear);
 }


@ -746,17 +760,27 @@ static int segmented_read_std(struct x86_emulate_ctxt *ctxt,
 static int __do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt, int op_size)
 {
 	int rc;
-	unsigned size;
+	unsigned size, max_size;
 	unsigned long linear;
 	int cur_size = ctxt->fetch.end - ctxt->fetch.data;
 	struct segmented_address addr = { .seg = VCPU_SREG_CS,
 					   .ea = ctxt->eip + cur_size };

-	size = 15UL ^ cur_size;
-	rc = __linearize(ctxt, addr, size, false, true, &linear);
+	/*
+	 * We do not know exactly how many bytes will be needed, and
+	 * __linearize is expensive, so fetch as much as possible.  We
+	 * just have to avoid going beyond the 15 byte limit, the end
+	 * of the segment, or the end of the page.
+	 *
+	 * __linearize is called with size 0 so that it does not do any
+	 * boundary check itself.  Instead, we use max_size to check
+	 * against op_size.
+	 */
+	rc = __linearize(ctxt, addr, &max_size, 0, false, true, &linear);
 	if (unlikely(rc != X86EMUL_CONTINUE))
 		return rc;

+	size = min_t(unsigned, 15UL ^ cur_size, max_size);
 	size = min_t(unsigned, size, PAGE_SIZE - offset_in_page(linear));

 	/*
@ -766,7 +790,8 @@ static int __do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt, int op_size)
 	 * still, we must have hit the 15-byte boundary.
 	 */
 	if (unlikely(size < op_size))
-		return X86EMUL_UNHANDLEABLE;
+		return emulate_gp(ctxt, 0);
+
 	rc = ctxt->ops->fetch(ctxt, linear, ctxt->fetch.end,
 			      size, &ctxt->exception);
 	if (unlikely(rc != X86EMUL_CONTINUE))
@ -2012,7 +2037,7 @@ static int em_jmp_far(struct x86_emulate_ctxt *ctxt)

 	rc = assign_eip_far(ctxt, ctxt->src.val, new_desc.l);
 	if (rc != X86EMUL_CONTINUE) {
-		WARN_ON(!ctxt->mode != X86EMUL_MODE_PROT64);
+		WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
 		/* assigning eip failed; restore the old cs */
 		ops->set_segment(ctxt, old_sel, &old_desc, 0, VCPU_SREG_CS);
 		return rc;
@ -2109,7 +2134,7 @@ static int em_ret_far(struct x86_emulate_ctxt *ctxt)
 		return rc;
 	rc = assign_eip_far(ctxt, eip, new_desc.l);
 	if (rc != X86EMUL_CONTINUE) {
-		WARN_ON(!ctxt->mode != X86EMUL_MODE_PROT64);
+		WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
 		ops->set_segment(ctxt, old_cs, &old_desc, 0, VCPU_SREG_CS);
 	}
 	return rc;
@ -4262,6 +4287,7 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 		fetch_register_operand(op);
 		break;
 	case OpCL:
+		op->type = OP_IMM;
 		op->bytes = 1;
 		op->val = reg_read(ctxt, VCPU_REGS_RCX) & 0xff;
 		break;
@ -4269,6 +4295,7 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 		rc = decode_imm(ctxt, op, 1, true);
 		break;
 	case OpOne:
+		op->type = OP_IMM;
 		op->bytes = 1;
 		op->val = 1;
 		break;
@ -4327,21 +4354,27 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
 		ctxt->memop.bytes = ctxt->op_bytes + 2;
 		goto mem_common;
 	case OpES:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_ES;
 		break;
 	case OpCS:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_CS;
 		break;
 	case OpSS:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_SS;
 		break;
 	case OpDS:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_DS;
 		break;
 	case OpFS:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_FS;
 		break;
 	case OpGS:
+		op->type = OP_IMM;
 		op->val = VCPU_SREG_GS;
 		break;
 	case OpImplicit:
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		vmcs_write32(TPR_THRESHOLD, 0);
 	}

-	kvm_vcpu_reload_apic_access_page(vcpu);
+	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);

 	if (vmx_vm_has_apicv(vcpu->kvm))
 		memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
@ -6426,6 +6426,8 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx)
 	const unsigned long *fields = shadow_read_write_fields;
 	const int num_fields = max_shadow_read_write_fields;

+	preempt_disable();
+
 	vmcs_load(shadow_vmcs);

 	for (i = 0; i < num_fields; i++) {
@ -6449,6 +6451,8 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx)

 	vmcs_clear(shadow_vmcs);
 	vmcs_load(vmx->loaded_vmcs->vmcs);
+
+	preempt_enable();
 }

 static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@ -319,8 +319,8 @@ config XTENSA_PLATFORM_S6105

 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
+	select ETHOC if ETHERNET
 	select SERIAL_CONSOLE
-	select ETHOC
 	select XTENSA_CALIBRATE_CCOUNT
 	help
 	  XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
@ -367,7 +367,7 @@ config BUILTIN_DTB
 config BLK_DEV_SIMDISK
 	tristate "Host file-based simulated block device support"
 	default n
-	depends on XTENSA_PLATFORM_ISS
+	depends on XTENSA_PLATFORM_ISS && BLOCK
 	help
 	  Create block devices that map to files in the host file system.
 	  Device binding to host file may be changed at runtime via proc
--- a/arch/xtensa/boot/dts/lx200mx.dts
+++ b/arch/xtensa/boot/dts/lx200mx.dts
@ -0,0 +1,16 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-lx200";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x06000000>;
+	};
+	pic: pic {
+		compatible = "cdns,xtensa-mx";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+};
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@ -0,0 +1,131 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_DC233C=y
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@ -0,0 +1,135 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_mmuhifi_c3"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HAVE_SMP=y
+CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="lx200mx"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@ -277,6 +277,8 @@ static inline pte_t pte_mkwrite(pte_t pte)
 static inline pte_t pte_mkspecial(pte_t pte)
 	{ return pte; }

+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CA_MASK))
+
 /*
 * Conversion functions: convert a page and protection to a page entry,
 * and a page entry and page directory to the page they refer to.
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@ -384,7 +384,8 @@ __SYSCALL(174, sys_chroot, 1)
 #define __NR_pivot_root 			175
 __SYSCALL(175, sys_pivot_root, 2)
 #define __NR_umount 				176
-__SYSCALL(176, sys_umount, 2)
+__SYSCALL(176, sys_oldumount, 1)
+#define __ARCH_WANT_SYS_OLDUMOUNT
 #define __NR_swapoff 				177
 __SYSCALL(177, sys_swapoff, 1)
 #define __NR_sync 				178
@ -742,7 +743,14 @@ __SYSCALL(335, sys_sched_getattr, 3)
 #define __NR_renameat2				336
 __SYSCALL(336, sys_renameat2, 5)

-#define __NR_syscall_count			337
+#define __NR_seccomp				337
+__SYSCALL(337, sys_seccomp, 3)
+#define __NR_getrandom				338
+__SYSCALL(338, sys_getrandom, 3)
+#define __NR_memfd_create			339
+__SYSCALL(339, sys_memfd_create, 2)
+
+#define __NR_syscall_count			340

 /*
 * sysxtensa syscall handler
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@ -171,20 +171,23 @@ config WANT_DEV_COREDUMP
 	  Drivers should "select" this option if they desire to use the
 	  device coredump mechanism.

-config DISABLE_DEV_COREDUMP
-	bool "Disable device coredump" if EXPERT
+config ALLOW_DEV_COREDUMP
+	bool "Allow device coredump" if EXPERT
+	default y
 	help
-	  Disable the device coredump mechanism despite drivers wanting to
-	  use it; this allows for more sensitive systems or systems that
-	  don't want to ever access the information to not have the code,
-	  nor keep any data.
+	  This option controls if the device coredump mechanism is available or
+	  not; if disabled, the mechanism will be omitted even if drivers that
+	  can use it are enabled.
+	  Say 'N' for more sensitive systems or systems that don't want
+	  to ever access the information to not have the code, nor keep any
+	  data.

-	  If unsure, say N.
+	  If unsure, say Y.

 config DEV_COREDUMP
 	bool
 	default y if WANT_DEV_COREDUMP
-	depends on !DISABLE_DEV_COREDUMP
+	depends on ALLOW_DEV_COREDUMP

 config DEBUG_DRIVER
 	bool "Driver Core verbose debug messages"
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@ -724,12 +724,12 @@ class_dir_create_and_add(struct class *class, struct kobject *parent_kobj)
 	return &dir->kobj;
 }

+static DEFINE_MUTEX(gdp_mutex);

 static struct kobject *get_device_parent(struct device *dev,
 					 struct device *parent)
 {
 	if (dev->class) {
-		static DEFINE_MUTEX(gdp_mutex);
 		struct kobject *kobj = NULL;
 		struct kobject *parent_kobj;
 		struct kobject *k;
@ -793,7 +793,9 @@ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
 	    glue_dir->kset != &dev->class->p->glue_dirs)
 		return;

+	mutex_lock(&gdp_mutex);
 	kobject_put(glue_dir);
+	mutex_unlock(&gdp_mutex);
 }

 static void cleanup_device_parent(struct device *dev)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@ -342,7 +342,6 @@ struct rbd_device {

 	struct list_head	rq_queue;	/* incoming rq queue */
 	spinlock_t		lock;		/* queue, flags, open_count */
-	struct workqueue_struct	*rq_wq;
 	struct work_struct	rq_work;

 	struct rbd_image_header	header;
@ -402,6 +401,8 @@ static struct kmem_cache	*rbd_segment_name_cache;
 static int rbd_major;
 static DEFINE_IDA(rbd_dev_id_ida);

+static struct workqueue_struct *rbd_wq;
+
 /*
 * Default to false for now, as single-major requires >= 0.75 version of
 * userspace rbd utility.
@ -3452,7 +3453,7 @@ static void rbd_request_fn(struct request_queue *q)
 	}

 	if (queued)
-		queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
+		queue_work(rbd_wq, &rbd_dev->rq_work);
 }

 /*
@ -3532,7 +3533,7 @@ static int rbd_obj_read_sync(struct rbd_device *rbd_dev,
 	page_count = (u32) calc_pages_for(offset, length);
 	pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
 	if (IS_ERR(pages))
-		ret = PTR_ERR(pages);
+		return PTR_ERR(pages);

 	ret = -ENOMEM;
 	obj_request = rbd_obj_request_create(object_name, offset, length,
@ -5242,16 +5243,9 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev)
 	set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
 	set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);

-	rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
-					 rbd_dev->disk->disk_name);
-	if (!rbd_dev->rq_wq) {
-		ret = -ENOMEM;
-		goto err_out_mapping;
-	}
-
 	ret = rbd_bus_add_dev(rbd_dev);
 	if (ret)
-		goto err_out_workqueue;
+		goto err_out_mapping;

 	/* Everything's ready.  Announce the disk to the world. */

@ -5263,9 +5257,6 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev)

 	return ret;

-err_out_workqueue:
-	destroy_workqueue(rbd_dev->rq_wq);
-	rbd_dev->rq_wq = NULL;
 err_out_mapping:
 	rbd_dev_mapping_clear(rbd_dev);
 err_out_disk:
@ -5512,7 +5503,6 @@ static void rbd_dev_device_release(struct device *dev)
 {
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);

-	destroy_workqueue(rbd_dev->rq_wq);
 	rbd_free_disk(rbd_dev);
 	clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
 	rbd_dev_mapping_clear(rbd_dev);
@ -5716,11 +5706,21 @@ static int __init rbd_init(void)
 	if (rc)
 		return rc;

+	/*
+	 * The number of active work items is limited by the number of
+	 * rbd devices, so leave @max_active at default.
+	 */
+	rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
+	if (!rbd_wq) {
+		rc = -ENOMEM;
+		goto err_out_slab;
+	}
+
 	if (single_major) {
 		rbd_major = register_blkdev(0, RBD_DRV_NAME);
 		if (rbd_major < 0) {
 			rc = rbd_major;
-			goto err_out_slab;
+			goto err_out_wq;
 		}
 	}

@ -5738,6 +5738,8 @@ static int __init rbd_init(void)
 err_out_blkdev:
 	if (single_major)
 		unregister_blkdev(rbd_major, RBD_DRV_NAME);
+err_out_wq:
+	destroy_workqueue(rbd_wq);
 err_out_slab:
 	rbd_slab_exit();
 	return rc;
@ -5749,6 +5751,7 @@ static void __exit rbd_exit(void)
 	rbd_sysfs_cleanup();
 	if (single_major)
 		unregister_blkdev(rbd_major, RBD_DRV_NAME);
+	destroy_workqueue(rbd_wq);
 	rbd_slab_exit();
 }

--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@ -560,7 +560,8 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 	}

 	if (page_zero_filled(uncmem)) {
-		kunmap_atomic(user_mem);
+		if (user_mem)
+			kunmap_atomic(user_mem);
 		/* Free memory associated with this sector now. */
 		bit_spin_lock(ZRAM_ACCESS, &meta->table[index].value);
 		zram_free_page(zram, index);
--- a/drivers/char/hw_random/pseries-rng.c
+++ b/drivers/char/hw_random/pseries-rng.c
@ -25,18 +25,21 @@
 #include <asm/vio.h>


-static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
+static int pseries_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
 {
+	u64 buffer[PLPAR_HCALL_BUFSIZE];
+	size_t size = max < 8 ? max : 8;
 	int rc;

-	rc = plpar_hcall(H_RANDOM, (unsigned long *)data);
+	rc = plpar_hcall(H_RANDOM, (unsigned long *)buffer);
 	if (rc != H_SUCCESS) {
 		pr_err_ratelimited("H_RANDOM call failed %d\n", rc);
 		return -EIO;
 	}
+	memcpy(data, buffer, size);

 	/* The hypervisor interface returns 64 bits */
-	return 8;
+	return size;
 }

 /**
@ -55,7 +58,7 @@ static unsigned long pseries_rng_get_desired_dma(struct vio_dev *vdev)

 static struct hwrng pseries_rng = {
 	.name		= KBUILD_MODNAME,
-	.data_read	= pseries_rng_data_read,
+	.read		= pseries_rng_read,
 };

 static int __init pseries_rng_probe(struct vio_dev *dev,
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@ -285,7 +285,7 @@ static long raw_ctl_compat_ioctl(struct file *file, unsigned int cmd,

 static const struct file_operations raw_fops = {
 	.read		= new_sync_read,
-	.read_iter	= generic_file_read_iter,
+	.read_iter	= blkdev_read_iter,
 	.write		= new_sync_write,
 	.write_iter	= blkdev_write_iter,
 	.fsync		= blkdev_fsync,
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@ -1449,8 +1449,6 @@ static int add_port(struct ports_device *portdev, u32 id)
 	spin_lock_init(&port->outvq_lock);
 	init_waitqueue_head(&port->waitqueue);

-	virtio_device_ready(portdev->vdev);
-
 	/* Fill the in_vq with buffers so the host can send us data. */
 	nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock);
 	if (!nr_added_bufs) {
@ -2026,6 +2024,8 @@ static int virtcons_probe(struct virtio_device *vdev)
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);

+	virtio_device_ready(portdev->vdev);
+
 	if (multiport) {
 		unsigned int nr_added_bufs;

--- a/drivers/crypto/caam/key_gen.c
+++ b/drivers/crypto/caam/key_gen.c
@ -48,23 +48,29 @@ int gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len,
 	u32 *desc;
 	struct split_key_result result;
 	dma_addr_t dma_addr_in, dma_addr_out;
-	int ret = 0;
+	int ret = -ENOMEM;

 	desc = kmalloc(CAAM_CMD_SZ * 6 + CAAM_PTR_SZ * 2, GFP_KERNEL | GFP_DMA);
 	if (!desc) {
 		dev_err(jrdev, "unable to allocate key input memory\n");
-		return -ENOMEM;
+		return ret;
 	}

-	init_job_desc(desc, 0);
-
 	dma_addr_in = dma_map_single(jrdev, (void *)key_in, keylen,
 				     DMA_TO_DEVICE);
 	if (dma_mapping_error(jrdev, dma_addr_in)) {
 		dev_err(jrdev, "unable to map key input memory\n");
-		kfree(desc);
-		return -ENOMEM;
+		goto out_free;
 	}
+
+	dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
+				      DMA_FROM_DEVICE);
+	if (dma_mapping_error(jrdev, dma_addr_out)) {
+		dev_err(jrdev, "unable to map key output memory\n");
+		goto out_unmap_in;
+	}
+
+	init_job_desc(desc, 0);
 	append_key(desc, dma_addr_in, keylen, CLASS_2 | KEY_DEST_CLASS_REG);

 	/* Sets MDHA up into an HMAC-INIT */
@ -81,13 +87,6 @@ int gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len,
 	 * FIFO_STORE with the explicit split-key content store
 	 * (0x26 output type)
 	 */
-	dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
-				      DMA_FROM_DEVICE);
-	if (dma_mapping_error(jrdev, dma_addr_out)) {
-		dev_err(jrdev, "unable to map key output memory\n");
-		kfree(desc);
-		return -ENOMEM;
-	}
 	append_fifo_store(desc, dma_addr_out, split_key_len,
 			  LDST_CLASS_2_CCB | FIFOST_TYPE_SPLIT_KEK);

@ -115,10 +114,10 @@ int gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len,

 	dma_unmap_single(jrdev, dma_addr_out, split_key_pad_len,
 			 DMA_FROM_DEVICE);
+out_unmap_in:
 	dma_unmap_single(jrdev, dma_addr_in, keylen, DMA_TO_DEVICE);
-
+out_free:
 	kfree(desc);
-
 	return ret;
 }
 EXPORT_SYMBOL(gen_split_key);
--- a/drivers/crypto/qat/qat_common/adf_accel_devices.h
+++ b/drivers/crypto/qat/qat_common/adf_accel_devices.h
@ -198,8 +198,7 @@ struct adf_accel_dev {
 	struct dentry *debugfs_dir;
 	struct list_head list;
 	struct module *owner;
-	uint8_t accel_id;
-	uint8_t numa_node;
 	struct adf_accel_pci accel_pci_dev;
+	uint8_t accel_id;
 } __packed;
 #endif
--- a/drivers/crypto/qat/qat_common/adf_transport.c
+++ b/drivers/crypto/qat/qat_common/adf_transport.c
@ -419,9 +419,10 @@ static int adf_init_bank(struct adf_accel_dev *accel_dev,
 		WRITE_CSR_RING_BASE(csr_addr, bank_num, i, 0);
 		ring = &bank->rings[i];
 		if (hw_data->tx_rings_mask & (1 << i)) {
-			ring->inflights = kzalloc_node(sizeof(atomic_t),
-						       GFP_KERNEL,
-						       accel_dev->numa_node);
+			ring->inflights =
+				kzalloc_node(sizeof(atomic_t),
+					     GFP_KERNEL,
+					     dev_to_node(&GET_DEV(accel_dev)));
 			if (!ring->inflights)
 				goto err;
 		} else {
@ -469,13 +470,14 @@ int adf_init_etr_data(struct adf_accel_dev *accel_dev)
 	int i, ret;

 	etr_data = kzalloc_node(sizeof(*etr_data), GFP_KERNEL,
-				accel_dev->numa_node);
+				dev_to_node(&GET_DEV(accel_dev)));
 	if (!etr_data)
 		return -ENOMEM;

 	num_banks = GET_MAX_BANKS(accel_dev);
 	size = num_banks * sizeof(struct adf_etr_bank_data);
-	etr_data->banks = kzalloc_node(size, GFP_KERNEL, accel_dev->numa_node);
+	etr_data->banks = kzalloc_node(size, GFP_KERNEL,
+				       dev_to_node(&GET_DEV(accel_dev)));
 	if (!etr_data->banks) {
 		ret = -ENOMEM;
 		goto err_bank;
--- a/drivers/crypto/qat/qat_common/qat_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_algs.c
@ -596,7 +596,8 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
 	if (unlikely(!n))
 		return -EINVAL;

-	bufl = kmalloc_node(sz, GFP_ATOMIC, inst->accel_dev->numa_node);
+	bufl = kmalloc_node(sz, GFP_ATOMIC,
+			    dev_to_node(&GET_DEV(inst->accel_dev)));
 	if (unlikely(!bufl))
 		return -ENOMEM;

@ -605,6 +606,8 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
 		goto err;

 	for_each_sg(assoc, sg, assoc_n, i) {
+		if (!sg->length)
+			continue;
 		bufl->bufers[bufs].addr = dma_map_single(dev,
 							 sg_virt(sg),
 							 sg->length,
@ -640,7 +643,7 @@ static int qat_alg_sgl_to_bufl(struct qat_crypto_instance *inst,
 		struct qat_alg_buf *bufers;

 		buflout = kmalloc_node(sz, GFP_ATOMIC,
-				       inst->accel_dev->numa_node);
+				       dev_to_node(&GET_DEV(inst->accel_dev)));
 		if (unlikely(!buflout))
 			goto err;
 		bloutp = dma_map_single(dev, buflout, sz, DMA_TO_DEVICE);
--- a/drivers/crypto/qat/qat_common/qat_crypto.c
+++ b/drivers/crypto/qat/qat_common/qat_crypto.c
@ -109,12 +109,14 @@ struct qat_crypto_instance *qat_crypto_get_instance_node(int node)

 	list_for_each(itr, adf_devmgr_get_head()) {
 		accel_dev = list_entry(itr, struct adf_accel_dev, list);
-		if (accel_dev->numa_node == node && adf_dev_started(accel_dev))
+		if ((node == dev_to_node(&GET_DEV(accel_dev)) ||
+			dev_to_node(&GET_DEV(accel_dev)) < 0)
+				&& adf_dev_started(accel_dev))
 			break;
 		accel_dev = NULL;
 	}
 	if (!accel_dev) {
-		pr_err("QAT: Could not find device on give node\n");
+		pr_err("QAT: Could not find device on node %d\n", node);
 		accel_dev = adf_devmgr_get_first();
 	}
 	if (!accel_dev || !adf_dev_started(accel_dev))
@ -164,7 +166,7 @@ static int qat_crypto_create_instances(struct adf_accel_dev *accel_dev)

 	for (i = 0; i < num_inst; i++) {
 		inst = kzalloc_node(sizeof(*inst), GFP_KERNEL,
-				    accel_dev->numa_node);
+				    dev_to_node(&GET_DEV(accel_dev)));
 		if (!inst)
 			goto err;

--- a/drivers/crypto/qat/qat_dh895xcc/adf_admin.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_admin.c
@ -108,7 +108,7 @@ int adf_init_admin_comms(struct adf_accel_dev *accel_dev)
 	uint64_t reg_val;

 	admin = kzalloc_node(sizeof(*accel_dev->admin), GFP_KERNEL,
-			     accel_dev->numa_node);
+			     dev_to_node(&GET_DEV(accel_dev)));
 	if (!admin)
 		return -ENOMEM;
 	admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
--- a/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_drv.c
@ -119,21 +119,6 @@ static void adf_cleanup_accel(struct adf_accel_dev *accel_dev)
 	kfree(accel_dev);
 }

-static uint8_t adf_get_dev_node_id(struct pci_dev *pdev)
-{
-	unsigned int bus_per_cpu = 0;
-	struct cpuinfo_x86 *c = &cpu_data(num_online_cpus() - 1);
-
-	if (!c->phys_proc_id)
-		return 0;
-
-	bus_per_cpu = 256 / (c->phys_proc_id + 1);
-
-	if (bus_per_cpu != 0)
-		return pdev->bus->number / bus_per_cpu;
-	return 0;
-}
-
 static int qat_dev_start(struct adf_accel_dev *accel_dev)
 {
 	int cpus = num_online_cpus();
@ -235,7 +220,6 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *pmisc_bar_addr = NULL;
 	char name[ADF_DEVICE_NAME_LENGTH];
 	unsigned int i, bar_nr;
-	uint8_t node;
 	int ret;

 	switch (ent->device) {
@ -246,12 +230,19 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}

-	node = adf_get_dev_node_id(pdev);
-	accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL, node);
+	if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
+		/* If the accelerator is connected to a node with no memory
+		 * there is no point in using the accelerator since the remote
+		 * memory transaction will be very slow. */
+		dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
+		return -EINVAL;
+	}
+
+	accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
+			         dev_to_node(&pdev->dev));
 	if (!accel_dev)
 		return -ENOMEM;

-	accel_dev->numa_node = node;
 	INIT_LIST_HEAD(&accel_dev->crypto_list);

 	/* Add accel device to accel table.
@ -264,7 +255,8 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)

 	accel_dev->owner = THIS_MODULE;
 	/* Allocate and configure device configuration structure */
-	hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL, node);
+	hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
+			       dev_to_node(&pdev->dev));
 	if (!hw_data) {
 		ret = -ENOMEM;
 		goto out_err;
--- a/drivers/crypto/qat/qat_dh895xcc/adf_isr.c
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_isr.c
@ -168,7 +168,7 @@ static int adf_isr_alloc_msix_entry_table(struct adf_accel_dev *accel_dev)
 	uint32_t msix_num_entries = hw_data->num_banks + 1;

 	entries = kzalloc_node(msix_num_entries * sizeof(*entries),
-			       GFP_KERNEL, accel_dev->numa_node);
+			       GFP_KERNEL, dev_to_node(&GET_DEV(accel_dev)));
 	if (!entries)
 		return -ENOMEM;

--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@ -1107,52 +1107,14 @@ bool edma_filter_fn(struct dma_chan *chan, void *param)
 }
 EXPORT_SYMBOL(edma_filter_fn);

-static struct platform_device *pdev0, *pdev1;
-
-static const struct platform_device_info edma_dev_info0 = {
-	.name = "edma-dma-engine",
-	.id = 0,
-	.dma_mask = DMA_BIT_MASK(32),
-};
-
-static const struct platform_device_info edma_dev_info1 = {
-	.name = "edma-dma-engine",
-	.id = 1,
-	.dma_mask = DMA_BIT_MASK(32),
-};
-
 static int edma_init(void)
 {
-	int ret = platform_driver_register(&edma_driver);
-
-	if (ret == 0) {
-		pdev0 = platform_device_register_full(&edma_dev_info0);
-		if (IS_ERR(pdev0)) {
-			platform_driver_unregister(&edma_driver);
-			ret = PTR_ERR(pdev0);
-			goto out;
-		}
-	}
-
-	if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
-		pdev1 = platform_device_register_full(&edma_dev_info1);
-		if (IS_ERR(pdev1)) {
-			platform_driver_unregister(&edma_driver);
-			platform_device_unregister(pdev0);
-			ret = PTR_ERR(pdev1);
-		}
-	}
-
-out:
-	return ret;
+	return platform_driver_register(&edma_driver);
 }
 subsys_initcall(edma_init);

 static void __exit edma_exit(void)
 {
-	platform_device_unregister(pdev0);
-	if (pdev1)
-		platform_device_unregister(pdev1);
 	platform_driver_unregister(&edma_driver);
 }
 module_exit(edma_exit);
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@ -260,7 +260,7 @@ static void armada_drm_vblank_off(struct armada_crtc *dcrtc)
 	 * Tell the DRM core that vblank IRQs aren't going to happen for
 	 * a while.  This cleans up any pending vblank events for us.
 	 */
-	drm_vblank_off(dev, dcrtc->num);
+	drm_crtc_vblank_off(&dcrtc->crtc);

 	/* Handle any pending flip event. */
 	spin_lock_irq(&dev->event_lock);
@ -289,6 +289,8 @@ static void armada_drm_crtc_dpms(struct drm_crtc *crtc, int dpms)
 		armada_drm_crtc_update(dcrtc);
 		if (dpms_blanked(dpms))
 			armada_drm_vblank_off(dcrtc);
+		else
+			drm_crtc_vblank_on(&dcrtc->crtc);
 	}
 }

@ -526,7 +528,7 @@ static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,
 	/* Wait for pending flips to complete */
 	wait_event(dcrtc->frame_wait, !dcrtc->frame_work);

-	drm_vblank_pre_modeset(crtc->dev, dcrtc->num);
+	drm_crtc_vblank_off(crtc);

 	crtc->mode = *adj;

@ -617,7 +619,7 @@ static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,

 	armada_drm_crtc_update(dcrtc);

-	drm_vblank_post_modeset(crtc->dev, dcrtc->num);
+	drm_crtc_vblank_on(crtc);
 	armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms));

 	return 0;
@ -945,18 +947,15 @@ static int armada_drm_crtc_page_flip(struct drm_crtc *crtc,
 	armada_reg_queue_end(work->regs, i);

 	/*
-	 * Hold the old framebuffer for the work - DRM appears to drop our
-	 * reference to the old framebuffer in drm_mode_page_flip_ioctl().
+	 * Ensure that we hold a reference on the new framebuffer.
+	 * This has to match the behaviour in mode_set.
 	 */
-	drm_framebuffer_reference(work->old_fb);
+	drm_framebuffer_reference(fb);

 	ret = armada_drm_crtc_queue_frame_work(dcrtc, work);
 	if (ret) {
-		/*
-		 * Undo our reference above; DRM does not drop the reference
-		 * to this object on error, so that's okay.
-		 */
-		drm_framebuffer_unreference(work->old_fb);
+		/* Undo our reference above */
+		drm_framebuffer_unreference(fb);
 		kfree(work);
 		return ret;
 	}
--- a/drivers/gpu/drm/armada/armada_drv.c
+++ b/drivers/gpu/drm/armada/armada_drv.c
@ -190,6 +190,7 @@ static int armada_drm_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto err_comp;

+	dev->irq_enabled = true;
 	dev->vblank_disable_allowed = 1;

 	ret = armada_fbdev_init(dev);
@ -331,7 +332,7 @@ static struct drm_driver armada_drm_driver = {
 	.desc			= "Armada SoC DRM",
 	.date			= "20120730",
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET |
-				  DRIVER_PRIME,
+				  DRIVER_HAVE_IRQ | DRIVER_PRIME,
 	.ioctls			= armada_ioctls,
 	.fops			= &armada_drm_fops,
 };
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
@ -1355,13 +1355,8 @@ static void exynos_dp_unbind(struct device *dev, struct device *master,
 				void *data)
 {
 	struct exynos_drm_display *display = dev_get_drvdata(dev);
-	struct exynos_dp_device *dp = display->ctx;
-	struct drm_encoder *encoder = dp->encoder;

 	exynos_dp_dpms(display, DRM_MODE_DPMS_OFF);
-
-	exynos_dp_connector_destroy(&dp->connector);
-	encoder->funcs->destroy(encoder);
 }

 static const struct component_ops exynos_dp_ops = {
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@ -71,13 +71,16 @@ static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
 				!atomic_read(&exynos_crtc->pending_flip),
 				HZ/20))
 			atomic_set(&exynos_crtc->pending_flip, 0);
-		drm_vblank_off(crtc->dev, exynos_crtc->pipe);
+		drm_crtc_vblank_off(crtc);
 	}

 	if (manager->ops->dpms)
 		manager->ops->dpms(manager, mode);

 	exynos_crtc->dpms = mode;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		drm_crtc_vblank_on(crtc);
 }

 static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
--- a/drivers/gpu/drm/exynos/exynos_drm_dpi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dpi.c
@ -338,14 +338,10 @@ err_del_component:

 int exynos_dpi_remove(struct device *dev)
 {
-	struct drm_encoder *encoder = exynos_dpi_display.encoder;
 	struct exynos_dpi *ctx = exynos_dpi_display.ctx;

 	exynos_dpi_dpms(&exynos_dpi_display, DRM_MODE_DPMS_OFF);

-	exynos_dpi_connector_destroy(&ctx->connector);
-	encoder->funcs->destroy(encoder);
-
 	if (ctx->panel)
 		drm_panel_detach(ctx->panel);

--- a/Show More
+++ b/Show More