You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kernel_samsung_sm7125/drivers/mmc/pxamci.h

125 lines
2.7 KiB

#undef MMC_STRPCL
#undef MMC_STAT
#undef MMC_CLKRT
#undef MMC_SPI
#undef MMC_CMDAT
#undef MMC_RESTO
#undef MMC_RDTO
#undef MMC_BLKLEN
#undef MMC_NOB
#undef MMC_PRTBUF
#undef MMC_I_MASK
#undef END_CMD_RES
#undef PRG_DONE
#undef DATA_TRAN_DONE
#undef MMC_I_REG
#undef MMC_CMD
#undef MMC_ARGH
#undef MMC_ARGL
#undef MMC_RES
#undef MMC_RXFIFO
#undef MMC_TXFIFO
#define MMC_STRPCL 0x0000
#define STOP_CLOCK (1 << 0)
#define START_CLOCK (2 << 0)
#define MMC_STAT 0x0004
#define STAT_END_CMD_RES (1 << 13)
#define STAT_PRG_DONE (1 << 12)
#define STAT_DATA_TRAN_DONE (1 << 11)
#define STAT_CLK_EN (1 << 8)
#define STAT_RECV_FIFO_FULL (1 << 7)
#define STAT_XMIT_FIFO_EMPTY (1 << 6)
#define STAT_RES_CRC_ERR (1 << 5)
#define STAT_SPI_READ_ERROR_TOKEN (1 << 4)
#define STAT_CRC_READ_ERROR (1 << 3)
#define STAT_CRC_WRITE_ERROR (1 << 2)
#define STAT_TIME_OUT_RESPONSE (1 << 1)
#define STAT_READ_TIME_OUT (1 << 0)
#define MMC_CLKRT 0x0008 /* 3 bit */
#define MMC_SPI 0x000c
#define SPI_CS_ADDRESS (1 << 3)
#define SPI_CS_EN (1 << 2)
#define CRC_ON (1 << 1)
#define SPI_EN (1 << 0)
#define MMC_CMDAT 0x0010
#define CMDAT_DMAEN (1 << 7)
#define CMDAT_INIT (1 << 6)
#define CMDAT_BUSY (1 << 5)
#define CMDAT_STREAM (1 << 4) /* 1 = stream */
#define CMDAT_WRITE (1 << 3) /* 1 = write */
#define CMDAT_DATAEN (1 << 2)
#define CMDAT_RESP_NONE (0 << 0)
#define CMDAT_RESP_SHORT (1 << 0)
#define CMDAT_RESP_R2 (2 << 0)
#define CMDAT_RESP_R3 (3 << 0)
#define MMC_RESTO 0x0014 /* 7 bit */
#define MMC_RDTO 0x0018 /* 16 bit */
#define MMC_BLKLEN 0x001c /* 10 bit */
#define MMC_NOB 0x0020 /* 16 bit */
#define MMC_PRTBUF 0x0024
#define BUF_PART_FULL (1 << 0)
#define MMC_I_MASK 0x0028
/*PXA27x MMC interrupts*/
#define SDIO_SUSPEND_ACK (1 << 12)
#define SDIO_INT (1 << 11)
#define RD_STALLED (1 << 10)
#define RES_ERR (1 << 9)
#define DAT_ERR (1 << 8)
#define TINT (1 << 7)
/*PXA2xx MMC interrupts*/
#define TXFIFO_WR_REQ (1 << 6)
#define RXFIFO_RD_REQ (1 << 5)
#define CLK_IS_OFF (1 << 4)
#define STOP_CMD (1 << 3)
#define END_CMD_RES (1 << 2)
#define PRG_DONE (1 << 1)
#define DATA_TRAN_DONE (1 << 0)
#ifdef CONFIG_PXA27x
#define MMC_I_MASK_ALL 0x00001fff
#else
#define MMC_I_MASK_ALL 0x0000007f
#endif
#define MMC_I_REG 0x002c
/* same as MMC_I_MASK */
#define MMC_CMD 0x0030
#define MMC_ARGH 0x0034 /* 16 bit */
#define MMC_ARGL 0x0038 /* 16 bit */
#define MMC_RES 0x003c /* 16 bit */
#define MMC_RXFIFO 0x0040 /* 8 bit */
#define MMC_TXFIFO 0x0044 /* 8 bit */
/*
* The base MMC clock rate
*/
#ifdef CONFIG_PXA27x
#define CLOCKRATE_MIN 304688
#define CLOCKRATE_MAX 19500000
#else
#define CLOCKRATE_MIN 312500
#define CLOCKRATE_MAX 20000000
#endif
#define CLOCKRATE CLOCKRATE_MAX