You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kernel_samsung_sm7125/arch/mips/kernel/irq-msc01.c

198 lines
4.5 KiB

/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Copyright (c) 2004 MIPS Inc
* Author: chris@mips.com
*
* Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/msc01_ic.h>
static unsigned long _icctrl_msc;
#define MSC01_IC_REG_BASE _icctrl_msc
#define MSCIC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0)
#define MSCIC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0)
static unsigned int irq_base;
/* mask off an interrupt */
static inline void mask_msc_irq(unsigned int irq)
{
if (irq < (irq_base + 32))
MSCIC_WRITE(MSC01_IC_DISL, 1<<(irq - irq_base));
else
MSCIC_WRITE(MSC01_IC_DISH, 1<<(irq - irq_base - 32));
}
/* unmask an interrupt */
static inline void unmask_msc_irq(unsigned int irq)
{
if (irq < (irq_base + 32))
MSCIC_WRITE(MSC01_IC_ENAL, 1<<(irq - irq_base));
else
MSCIC_WRITE(MSC01_IC_ENAH, 1<<(irq - irq_base - 32));
}
/*
* Enables the IRQ on SOC-it
*/
static void enable_msc_irq(unsigned int irq)
{
unmask_msc_irq(irq);
}
/*
* Initialize the IRQ on SOC-it
*/
static unsigned int startup_msc_irq(unsigned int irq)
{
unmask_msc_irq(irq);
return 0;
}
/*
* Disables the IRQ on SOC-it
*/
static void disable_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
}
/*
* Masks and ACKs an IRQ
*/
static void level_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
#ifdef CONFIG_MIPS_MT_SMTC
/* This actually needs to be a call into platform code */
if (irq_hwmask[irq] & ST0_IM)
set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
* Masks and ACKs an IRQ
*/
static void edge_mask_and_ack_msc_irq(unsigned int irq)
{
mask_msc_irq(irq);
if (!cpu_has_veic)
MSCIC_WRITE(MSC01_IC_EOI, 0);
else {
u32 r;
MSCIC_READ(MSC01_IC_SUP+irq*8, r);
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
}
#ifdef CONFIG_MIPS_MT_SMTC
if (irq_hwmask[irq] & ST0_IM)
set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
* End IRQ processing
*/
static void end_msc_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
unmask_msc_irq(irq);
}
/*
* Interrupt handler for interrupts coming from SOC-it.
*/
void ll_msc_irq(void)
{
unsigned int irq;
/* read the interrupt vector register */
MSCIC_READ(MSC01_IC_VEC, irq);
if (irq < 64)
do_IRQ(irq + irq_base);
else {
/* Ignore spurious interrupt */
}
}
void
msc_bind_eic_interrupt (unsigned int irq, unsigned int set)
{
MSCIC_WRITE(MSC01_IC_RAMW,
(irq<<MSC01_IC_RAMW_ADDR_SHF) | (set<<MSC01_IC_RAMW_DATA_SHF));
}
#define shutdown_msc_irq disable_msc_irq
struct irq_chip msc_levelirq_type = {
.typename = "SOC-it-Level",
.startup = startup_msc_irq,
.shutdown = shutdown_msc_irq,
.enable = enable_msc_irq,
.disable = disable_msc_irq,
.ack = level_mask_and_ack_msc_irq,
.end = end_msc_irq,
};
struct irq_chip msc_edgeirq_type = {
.typename = "SOC-it-Edge",
.startup =startup_msc_irq,
.shutdown = shutdown_msc_irq,
.enable = enable_msc_irq,
.disable = disable_msc_irq,
.ack = edge_mask_and_ack_msc_irq,
.end = end_msc_irq,
};
void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq)
{
extern void (*board_bind_eic_interrupt)(unsigned int irq, unsigned int regset);
_icctrl_msc = (unsigned long) ioremap (MIPS_MSC01_IC_REG_BASE, 0x40000);
/* Reset interrupt controller - initialises all registers to 0 */
MSCIC_WRITE(MSC01_IC_RST, MSC01_IC_RST_RST_BIT);
board_bind_eic_interrupt = &msc_bind_eic_interrupt;
for (; nirq >= 0; nirq--, imp++) {
int n = imp->im_irq;
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
irq_desc[base+n].chip = &msc_edgeirq_type;
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago
irq_desc[base+n].chip = &msc_levelirq_type;
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl);
}
}
irq_base = base;
MSCIC_WRITE(MSC01_IC_GENA, MSC01_IC_GENA_GENA_BIT); /* Enable interrupt generation */
}