You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kernel_samsung_sm7125/arch/powerpc/kernel/asm-offsets.c

384 lines
18 KiB

/*
* This program is used to generate definitions needed by
* assembly language modules.
*
* We use the technique used in the OSF Mach kernel code:
* generate asm statements containing #defines,
* compile this file to assembler, and then extract the
* #defines from the assembly-language output.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/suspend.h>
#include <linux/hrtimer.h>
#ifdef CONFIG_KVM
#include <linux/kvm_host.h>
#endif
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
#endif
#include <linux/kbuild.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/rtas.h>
#include <asm/vdso_datapage.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/lppaca.h>
#include <asm/cache.h>
#include <asm/compat.h>
#include <asm/mmu.h>
#include <asm/hvcall.h>
#endif
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/alpaca.h>
#endif
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include "head_booke.h"
#endif
int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(MM, offsetof(struct task_struct, mm));
#ifdef CONFIG_PPC64
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
rename thread_info to stack This finally renames the thread_info field in task structure to stack, so that the assumptions about this field are gone and archs have more freedom about placing the thread_info structure. Nonbroken archs which have a proper thread pointer can do the access to both current thread and task structure via a single pointer. It'll allow for a few more cleanups of the fork code, from which e.g. ia64 could benefit. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> [akpm@linux-foundation.org: build fix] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Andi Kleen <ak@muc.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
18 years ago
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
#endif /* CONFIG_PPC64 */
DEFINE(KSP, offsetof(struct thread_struct, ksp));
DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit));
DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
#ifdef CONFIG_ALTIVEC
DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
#endif /* CONFIG_ALTIVEC */
powerpc: Introduce VSX thread_struct and CONFIG_VSX The layout of the new VSR registers and how they overlap on top of the legacy FPR and VR registers is: VSR doubleword 0 VSR doubleword 1 ---------------------------------------------------------------- VSR[0] | FPR[0] | | ---------------------------------------------------------------- VSR[1] | FPR[1] | | ---------------------------------------------------------------- | ... | | | ... | | ---------------------------------------------------------------- VSR[30] | FPR[30] | | ---------------------------------------------------------------- VSR[31] | FPR[31] | | ---------------------------------------------------------------- VSR[32] | VR[0] | ---------------------------------------------------------------- VSR[33] | VR[1] | ---------------------------------------------------------------- | ... | | ... | ---------------------------------------------------------------- VSR[62] | VR[30] | ---------------------------------------------------------------- VSR[63] | VR[31] | ---------------------------------------------------------------- VSX has 64 128bit registers. The first 32 regs overlap with the FP registers and hence extend them with and additional 64 bits. The second 32 regs overlap with the VMX registers. This commit introduces the thread_struct changes required to reflect this register layout. Ptrace and signals code is updated so that the floating point registers are correctly accessed from the thread_struct when CONFIG_VSX is enabled. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago
#ifdef CONFIG_VSX
DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
#endif /* CONFIG_VSX */
#ifdef CONFIG_PPC64
DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
#else /* CONFIG_PPC64 */
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
#endif
#ifdef CONFIG_SPE
DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
#endif /* CONFIG_SPE */
#endif /* CONFIG_PPC64 */
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
#ifdef CONFIG_PPC64
DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size));
DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page));
DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start));
DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
powerpc: Make it possible to move the interrupt handlers away from the kernel This changes the way that the exception prologs transfer control to the handlers in 64-bit kernels with the aim of making it possible to have the prologs separate from the main body of the kernel. Now, instead of computing the address of the handler by taking the top 32 bits of the paca address (to get the 0xc0000000........ part) and ORing in something in the bottom 16 bits, we get the base address of the kernel by doing a load from the paca and add an offset. This also replaces an mfmsr and an ori to compute the MSR value for the handler with a load from the paca. That makes it unnecessary to have a separate version of EXCEPTION_PROLOG_PSERIES that forces 64-bit mode. We can no longer use a direct branches in the exception prolog code, which means that the SLB miss handlers can't branch directly to .slb_miss_realmode any more. Instead we have to compute the address and do an indirect branch. This is conditional on CONFIG_RELOCATABLE; for non-relocatable kernels we use a direct branch as before. (A later change will allow CONFIG_RELOCATABLE to be set on 64-bit powerpc.) Since the secondary CPUs on pSeries start execution in the first 0x100 bytes of real memory and then have to get to wherever the kernel is, we can't use a direct branch to get there. Instead this changes __secondary_hold_spinloop from a flag to a function pointer. When it is set to a non-NULL value, the secondary CPUs jump to the function pointed to by that value. Finally this eliminates one code difference between 32-bit and 64-bit by making __secondary_hold be the text address of the secondary CPU spinloop rather than a function descriptor for it. Signed-off-by: Paul Mackerras <paulus@samba.org>
17 years ago
DEFINE(PACAKBASE, offsetof(struct paca_struct, kernelbase));
DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago
DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
[POWERPC] Introduce address space "slices" The basic issue is to be able to do what hugetlbfs does but with different page sizes for some other special filesystems; more specifically, my need is: - Huge pages - SPE local store mappings using 64K pages on a 4K base page size kernel on Cell - Some special 4K segments in 64K-page kernels for mapping a dodgy type of powerpc-specific infiniband hardware that requires 4K MMU mappings for various reasons I won't explain here. The main issues are: - To maintain/keep track of the page size per "segment" (as we can only have one page size per segment on powerpc, which are 256MB divisions of the address space). - To make sure special mappings stay within their allotted "segments" (including MAP_FIXED crap) - To make sure everybody else doesn't mmap/brk/grow_stack into a "segment" that is used for a special mapping Some of the necessary mechanisms to handle that were present in the hugetlbfs code, but mostly in ways not suitable for anything else. The patch relies on some changes to the generic get_unmapped_area() that just got merged. It still hijacks hugetlb callbacks here or there as the generic code hasn't been entirely cleaned up yet but that shouldn't be a problem. So what is a slice ? Well, I re-used the mechanism used formerly by our hugetlbfs implementation which divides the address space in "meta-segments" which I called "slices". The division is done using 256MB slices below 4G, and 1T slices above. Thus the address space is divided currently into 16 "low" slices and 16 "high" slices. (Special case: high slice 0 is the area between 4G and 1T). Doing so simplifies significantly the tracking of segments and avoids having to keep track of all the 256MB segments in the address space. While I used the "concepts" of hugetlbfs, I mostly re-implemented everything in a more generic way and "ported" hugetlbfs to it. Slices can have an associated page size, which is encoded in the mmu context and used by the SLB miss handler to set the segment sizes. The hash code currently doesn't care, it has a specific check for hugepages, though I might add a mechanism to provide per-slice hash mapping functions in the future. The slice code provide a pair of "generic" get_unmapped_area() (bottomup and topdown) functions that should work with any slice size. There is some trickiness here so I would appreciate people to have a look at the implementation of these and let me know if I got something wrong. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
18 years ago
#ifdef CONFIG_PPC_MM_SLICES
DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
context.low_slices_psize));
DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct,
context.high_slices_psize));
DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp));
#else
DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
#endif /* CONFIG_PPC_MM_SLICES */
DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr));
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago
DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
powerpc: add scaled time accounting This adds POWERPC specific hooks for scaled time accounting. POWER6 includes a SPURR register. The SPURR is based off the PURR register but is scaled based on CPU frequency and issue rates. This gives a more accurate account of the instructions used per task. The PURR and timebase will be constant relative to the wall clock, irrespective of the CPU frequency. This implementation reads the SPURR register in account_system_vtime which is only call called on context witch and hard and soft irq entry and exit. The percentage of user and system time is then estimated using the ratio of these accounted by the PURR. If the SPURR is not present, the PURR read. An earlier implementation of this patch read the SPURR whenever the PURR was read, which included the system call entry and exit path. Unfortunately this showed a performance regression on lmbench runs, so was re-implemented. I've included the lmbench results here when run bare metal on POWER6. 1st column is the unpatch results. 2nd column is the results using the below patch and the 3rd is the % diff of these results from the base. 4th and 5th columns are the results and % differnce from the base using the older patch (SPURR read in syscall entry/exit path). Base Scaled-Acct SPURR-in-syscall Result Result % diff Result % diff Simple syscall: 0.3086 0.3086 0.0000 0.3452 11.8600 Simple read: 0.4591 0.4671 1.7425 0.5044 9.86713 Simple write: 0.4364 0.4366 0.0458 0.4731 8.40971 Simple stat: 2.0055 2.0295 1.1967 2.0669 3.06158 Simple fstat: 0.5962 0.5876 -1.442 0.6368 6.80979 Simple open/close: 3.1283 3.1009 -0.875 3.2088 2.57328 Select on 10 fd's: 0.8554 0.8457 -1.133 0.8667 1.32101 Select on 100 fd's: 3.5292 3.6329 2.9383 3.6664 3.88756 Select on 250 fd's: 7.9097 8.1881 3.5197 8.2242 3.97613 Select on 500 fd's: 15.2659 15.836 3.7357 15.873 3.97814 Select on 10 tcp fd's: 0.9576 0.9416 -1.670 0.9752 1.83792 Select on 100 tcp fd's: 7.248 7.2254 -0.311 7.2685 0.28283 Select on 250 tcp fd's: 17.7742 17.707 -0.375 17.749 -0.1406 Select on 500 tcp fd's: 35.4258 35.25 -0.496 35.286 -0.3929 Signal handler installation: 0.6131 0.6075 -0.913 0.647 5.52927 Signal handler overhead: 2.0919 2.1078 0.7600 2.1831 4.35967 Protection fault: 0.7345 0.7478 1.8107 0.8031 9.33968 Pipe latency: 33.006 16.398 -50.31 33.475 1.42368 AF_UNIX sock stream latency: 14.5093 30.910 113.03 30.715 111.692 Process fork+exit: 219.8 222.8 1.3648 229.37 4.35623 Process fork+execve: 876.14 873.28 -0.32 868.66 -0.8533 Process fork+/bin/sh -c: 2830 2876.5 1.6431 2958 4.52296 File /var/tmp/XXX write bw: 1193497 1195536 0.1708 118657 -0.5799 Pagefaults on /var/tmp/XXX: 3.1272 3.2117 2.7020 3.2521 3.99398 Also, kernel compile times show no difference with this patch applied. [pbadari@us.ibm.com: Avoid unnecessary PURR reading] Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years ago
DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
19 years ago
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr));
DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
DEFINE(SLBSHADOW_STACKVSID,
offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid));
DEFINE(SLBSHADOW_STACKESID,
offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].esid));
DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0));
DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1));
DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area));
#endif /* CONFIG_PPC64 */
/* RTAS */
DEFINE(RTASBASE, offsetof(struct rtas_t, base));
DEFINE(RTASENTRY, offsetof(struct rtas_t, entry));
/* Interrupt register frame */
DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
DEFINE(INT_FRAME_SIZE, STACK_INT_FRAME_SIZE);
#ifdef CONFIG_PPC64
DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
/* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
/* hcall statistics */
DEFINE(HCALL_STAT_SIZE, sizeof(struct hcall_stats));
DEFINE(HCALL_STAT_CALLS, offsetof(struct hcall_stats, num_calls));
DEFINE(HCALL_STAT_TB, offsetof(struct hcall_stats, tb_total));
DEFINE(HCALL_STAT_PURR, offsetof(struct hcall_stats, purr_total));
#endif /* CONFIG_PPC64 */
DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
#ifndef CONFIG_PPC64
DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
#endif /* CONFIG_PPC64 */
/*
* Note: these symbols include _ because they overlap with special
* register names
*/
DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
#ifndef CONFIG_PPC64
DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
/*
* The PowerPC 400-class & Book-E processors have neither the DAR
* nor the DSISR SPRs. Hence, we overload them to hold the similar
* DEAR and ESR SPRs for such processors. For critical interrupts
* we use them to hold SRR0 and SRR1.
*/
DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
#else /* CONFIG_PPC64 */
DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe));
/* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */
DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs));
DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
/* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
#endif
DEFINE(CLONE_VM, CLONE_VM);
DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
#ifndef CONFIG_PPC64
DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
#endif /* ! CONFIG_PPC64 */
/* About the CPU features table */
DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
DEFINE(pbe_address, offsetof(struct pbe, address));
DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
DEFINE(pbe_next, offsetof(struct pbe, next));
#ifndef CONFIG_PPC64
DEFINE(TASK_SIZE, TASK_SIZE);
DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
#endif /* ! CONFIG_PPC64 */
/* datapage offsets for use by vdso */
DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size));
DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size));
DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size));
DEFINE(CFG_DCACHE_LOGBLOCKSZ, offsetof(struct vdso_data, dcache_log_block_size));
#ifdef CONFIG_PPC64
DEFINE(CFG_SYSCALL_MAP64, offsetof(struct vdso_data, syscall_map_64));
DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec));
DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec));
DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec));
DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec));
DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec));
DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec));
DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec));
DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec));
#else
DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec));
DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
#endif
/* timeval/timezone offsets for use by vdso */
DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
/* Other bits used by the vdso */
DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
#ifdef CONFIG_BUG
DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
#endif
#ifdef CONFIG_PPC_ISERIES
/* the assembler miscalculates the VSID values */
DEFINE(PAGE_OFFSET_ESID, GET_ESID(PAGE_OFFSET));
DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET));
DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START));
DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
/* alpaca */
DEFINE(ALPACA_SIZE, sizeof(struct alpaca));
#endif
DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
DEFINE(PTE_SIZE, sizeof(pte_t));
#ifdef CONFIG_KVM
DEFINE(TLBE_BYTES, sizeof(struct tlbe));
DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack));
DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid));
DEFINE(VCPU_SHADOW_TLB, offsetof(struct kvm_vcpu, arch.shadow_tlb));
DEFINE(VCPU_SHADOW_MOD, offsetof(struct kvm_vcpu, arch.shadow_tlb_mod));
DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr));
DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr));
DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer));
DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr));
DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc));
DEFINE(VCPU_MSR, offsetof(struct kvm_vcpu, arch.msr));
DEFINE(VCPU_SPRG4, offsetof(struct kvm_vcpu, arch.sprg4));
DEFINE(VCPU_SPRG5, offsetof(struct kvm_vcpu, arch.sprg5));
DEFINE(VCPU_SPRG6, offsetof(struct kvm_vcpu, arch.sprg6));
DEFINE(VCPU_SPRG7, offsetof(struct kvm_vcpu, arch.sprg7));
DEFINE(VCPU_SHADOW_PID, offsetof(struct kvm_vcpu, arch.shadow_pid));
DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
#endif
return 0;
}