|
|
|
/*
|
|
|
|
* Qualcomm PM8xxx PMIC XOADC driver
|
|
|
|
*
|
|
|
|
* These ADCs are known as HK/XO (house keeping / chrystal oscillator)
|
|
|
|
* "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of
|
|
|
|
* specific-purpose and general purpose ADC converters and channels.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2017 Linaro Ltd.
|
|
|
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
|
|
|
|
#include "qcom-vadc-common.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Definitions for the "user processor" registers lifted from the v3.4
|
|
|
|
* Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC:
|
|
|
|
* drivers/misc/pmic8058-xoadc.c
|
|
|
|
* drivers/hwmon/pm8xxx-adc.c
|
|
|
|
* None of them contain any complete register specification, so this is
|
|
|
|
* a best effort of combining the information.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* These appear to be "battery monitor" registers */
|
|
|
|
#define ADC_ARB_BTM_CNTRL1 0x17e
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_EOC BIT(6)
|
|
|
|
#define ADC_ARB_BTM_CNTRL1_REQ BIT(7)
|
|
|
|
|
|
|
|
#define ADC_ARB_BTM_AMUX_CNTRL 0x17f
|
|
|
|
#define ADC_ARB_BTM_ANA_PARAM 0x180
|
|
|
|
#define ADC_ARB_BTM_DIG_PARAM 0x181
|
|
|
|
#define ADC_ARB_BTM_RSV 0x182
|
|
|
|
#define ADC_ARB_BTM_DATA1 0x183
|
|
|
|
#define ADC_ARB_BTM_DATA0 0x184
|
|
|
|
#define ADC_ARB_BTM_BAT_COOL_THR1 0x185
|
|
|
|
#define ADC_ARB_BTM_BAT_COOL_THR0 0x186
|
|
|
|
#define ADC_ARB_BTM_BAT_WARM_THR1 0x187
|
|
|
|
#define ADC_ARB_BTM_BAT_WARM_THR0 0x188
|
|
|
|
#define ADC_ARB_BTM_CNTRL2 0x18c
|
|
|
|
|
|
|
|
/* Proper ADC registers */
|
|
|
|
|
|
|
|
#define ADC_ARB_USRP_CNTRL 0x197
|
|
|
|
#define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_RSV1 BIT(1)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_RSV2 BIT(2)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_RSV3 BIT(3)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_RSV4 BIT(4)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_RSV5 BIT(5)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_EOC BIT(6)
|
|
|
|
#define ADC_ARB_USRP_CNTRL_REQ BIT(7)
|
|
|
|
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL 0x198
|
|
|
|
/*
|
|
|
|
* The channel mask includes the bits selecting channel mux and prescaler
|
|
|
|
* on PM8058, or channel mux and premux on PM8921.
|
|
|
|
*/
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1)
|
|
|
|
/* On PM8058 this is prescaling, on PM8921 this is premux */
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6)
|
|
|
|
#define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7)
|
|
|
|
#define ADC_AMUX_PREMUX_SHIFT 2
|
|
|
|
#define ADC_AMUX_SEL_SHIFT 4
|
|
|
|
|
|
|
|
/* We know very little about the bits in this register */
|
|
|
|
#define ADC_ARB_USRP_ANA_PARAM 0x199
|
|
|
|
#define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE
|
|
|
|
#define ADC_ARB_USRP_ANA_PARAM_EN 0xFF
|
|
|
|
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM 0x19A
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4)
|
|
|
|
/*
|
|
|
|
* On a later ADC the decimation factors are defined as
|
|
|
|
* 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this
|
|
|
|
* holds also for this older XOADC.
|
|
|
|
*/
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6)
|
|
|
|
#define ADC_ARB_USRP_DIG_PARAM_EN BIT(7)
|
|
|
|
#define ADC_DIG_PARAM_DEC_SHIFT 5
|
|
|
|
|
|
|
|
#define ADC_ARB_USRP_RSV 0x19B
|
|
|
|
#define ADC_ARB_USRP_RSV_RST BIT(0)
|
|
|
|
#define ADC_ARB_USRP_RSV_DTEST0 BIT(1)
|
|
|
|
#define ADC_ARB_USRP_RSV_DTEST1 BIT(2)
|
|
|
|
#define ADC_ARB_USRP_RSV_OP BIT(3)
|
|
|
|
#define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4)
|
|
|
|
#define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5)
|
|
|
|
#define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6)
|
|
|
|
#define ADC_ARB_USRP_RSV_TRM BIT(7)
|
|
|
|
#define ADC_RSV_IP_SEL_SHIFT 4
|
|
|
|
|
|
|
|
#define ADC_ARB_USRP_DATA0 0x19D
|
|
|
|
#define ADC_ARB_USRP_DATA1 0x19C
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Physical channels which MUST exist on all PM variants in order to provide
|
|
|
|
* proper reference points for calibration.
|
|
|
|
*
|
|
|
|
* @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel
|
|
|
|
* @PM8XXX_CHANNEL_125V: 1250mV reference channel
|
|
|
|
* @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel
|
|
|
|
* @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also
|
|
|
|
* measures XO temperature
|
|
|
|
*/
|
|
|
|
#define PM8XXX_CHANNEL_INTERNAL 0x0c
|
|
|
|
#define PM8XXX_CHANNEL_125V 0x0d
|
|
|
|
#define PM8XXX_CHANNEL_INTERNAL_2 0x0e
|
|
|
|
#define PM8XXX_CHANNEL_MUXOFF 0x0f
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PM8058 AMUX premux scaling, two bits. This is done of the channel before
|
|
|
|
* reaching the AMUX.
|
|
|
|
*/
|
|
|
|
#define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */
|
|
|
|
#define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */
|
|
|
|
#define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */
|
|
|
|
|
|
|
|
/* Defines reference voltage for the XOADC */
|
|
|
|
#define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */
|
|
|
|
#define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */
|
|
|
|
#define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */
|
|
|
|
#define AMUX_RSV3 0x3 /* not used */
|
|
|
|
#define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */
|
|
|
|
#define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */
|
|
|
|
#define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct xoadc_channel - encodes channel properties and defaults
|
|
|
|
* @datasheet_name: the hardwarename of this channel
|
|
|
|
* @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting
|
|
|
|
* this channel. Both this and the amux channel is needed to uniquely
|
|
|
|
* identify a channel. Values 0..3.
|
|
|
|
* @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this
|
|
|
|
* channel, bits 4..7, selects the amux, values 0..f
|
|
|
|
* @prescale: the channels have hard-coded prescale ratios defined
|
|
|
|
* by the hardware, this tells us what it is
|
|
|
|
* @type: corresponding IIO channel type, usually IIO_VOLTAGE or
|
|
|
|
* IIO_TEMP
|
|
|
|
* @scale_fn_type: the liner interpolation etc to convert the
|
|
|
|
* ADC code to the value that IIO expects, in uV or millicelsius
|
|
|
|
* etc. This scale function can be pretty elaborate if different
|
|
|
|
* thermistors are connected or other hardware characteristics are
|
|
|
|
* deployed.
|
|
|
|
* @amux_ip_rsv: ratiometric scale value used by the analog muxer: this
|
|
|
|
* selects the reference voltage for ratiometric scaling
|
|
|
|
*/
|
|
|
|
struct xoadc_channel {
|
|
|
|
const char *datasheet_name;
|
|
|
|
u8 pre_scale_mux:2;
|
|
|
|
u8 amux_channel:4;
|
|
|
|
const struct vadc_prescale_ratio prescale;
|
|
|
|
enum iio_chan_type type;
|
|
|
|
enum vadc_scale_fn_type scale_fn_type;
|
|
|
|
u8 amux_ip_rsv:3;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct xoadc_variant - encodes the XOADC variant characteristics
|
|
|
|
* @name: name of this PMIC variant
|
|
|
|
* @channels: the hardware channels and respective settings and defaults
|
|
|
|
* @broken_ratiometric: if the PMIC has broken ratiometric scaling (this
|
|
|
|
* is a known problem on PM8058)
|
|
|
|
* @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058)
|
|
|
|
* @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level
|
|
|
|
* mux
|
|
|
|
*/
|
|
|
|
struct xoadc_variant {
|
|
|
|
const char name[16];
|
|
|
|
const struct xoadc_channel *channels;
|
|
|
|
bool broken_ratiometric;
|
|
|
|
bool prescaling;
|
|
|
|
bool second_level_mux;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XOADC_CHAN macro parameters:
|
|
|
|
* _dname: the name of the channel
|
|
|
|
* _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel
|
|
|
|
* _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register
|
|
|
|
* for this channel. On some PMICs some of the bits select a prescaler, and
|
|
|
|
* on some PMICs some of the bits select various complex multiplex settings.
|
|
|
|
* _type: IIO channel type
|
|
|
|
* _prenum: prescaler numerator (dividend)
|
|
|
|
* _preden: prescaler denominator (divisor)
|
|
|
|
* _scale: scaling function type, this selects how the raw valued is mangled
|
|
|
|
* to output the actual processed measurement
|
|
|
|
* _amip: analog mux input parent when using ratiometric measurements
|
|
|
|
*/
|
|
|
|
#define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \
|
|
|
|
{ \
|
|
|
|
.datasheet_name = __stringify(_dname), \
|
|
|
|
.pre_scale_mux = _presmux, \
|
|
|
|
.amux_channel = _amux, \
|
|
|
|
.prescale = { .num = _prenum, .den = _preden }, \
|
|
|
|
.type = _type, \
|
|
|
|
.scale_fn_type = _scale, \
|
|
|
|
.amux_ip_rsv = _amip, \
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Taken from arch/arm/mach-msm/board-9615.c in the vendor tree:
|
|
|
|
* TODO: incomplete, needs testing.
|
|
|
|
*/
|
|
|
|
static const struct xoadc_channel pm8018_xoadc_channels[] = {
|
|
|
|
XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
|
|
|
|
/* Used for battery ID or battery temperature */
|
|
|
|
XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2),
|
|
|
|
XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
|
|
|
|
{ }, /* Sentinel */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree:
|
|
|
|
* TODO: needs testing.
|
|
|
|
*/
|
|
|
|
static const struct xoadc_channel pm8038_xoadc_channels[] = {
|
|
|
|
XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* AMUX8 used for battery temperature in most cases */
|
|
|
|
XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2),
|
|
|
|
XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
|
|
|
|
{ }, /* Sentinel */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This was created by cross-referencing the vendor tree
|
|
|
|
* arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[]
|
|
|
|
* with the "channel types" (first field) to find the right
|
|
|
|
* configuration for these channels on an MSM8x60 i.e. PM8058
|
|
|
|
* setup.
|
|
|
|
*/
|
|
|
|
static const struct xoadc_channel pm8058_xoadc_channels[] = {
|
|
|
|
XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/*
|
|
|
|
* AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in
|
|
|
|
* some code and documentation. But they are really just 5
|
|
|
|
* channels just like any other. They are connected to a switching
|
|
|
|
* matrix where they can be routed to any of the MPPs, not just
|
|
|
|
* 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is
|
|
|
|
* very confusing.
|
|
|
|
*/
|
|
|
|
XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
|
|
|
|
/* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */
|
|
|
|
{ }, /* Sentinel */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The PM8921 has some pre-muxing on its channels, this comes from the vendor tree
|
|
|
|
* include/linux/mfd/pm8xxx/pm8xxx-adc.h
|
|
|
|
* board-flo-pmic.c (Nexus 7) and board-8064-pmic.c
|
|
|
|
*/
|
|
|
|
static const struct xoadc_channel pm8921_xoadc_channels[] = {
|
|
|
|
XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* channel "ICHG" is reserved and not used on PM8921 */
|
|
|
|
XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */
|
|
|
|
XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* FIXME: look into the scaling of this temperature */
|
|
|
|
XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0),
|
|
|
|
/* The following channels have premux bit 0 set to 1 (all end in 4) */
|
|
|
|
XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* Set scaling to 1/2 based on the name for these two */
|
|
|
|
XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* Internal test signals, I think */
|
|
|
|
XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* The following channels have premux bit 1 set to 1 (all end in 8) */
|
|
|
|
/* I guess even ATEST8 will be divided by 3 here */
|
|
|
|
XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
/* I guess div 2 div 3 becomes div 6 */
|
|
|
|
XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1),
|
|
|
|
{ }, /* Sentinel */
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct pm8xxx_chan_info - ADC channel information
|
|
|
|
* @name: name of this channel
|
|
|
|
* @hwchan: pointer to hardware channel information (muxing & scaling settings)
|
|
|
|
* @calibration: whether to use absolute or ratiometric calibration
|
|
|
|
* @scale_fn_type: scaling function type
|
|
|
|
* @decimation: 0,1,2,3
|
|
|
|
* @amux_ip_rsv: ratiometric scale value if using ratiometric
|
|
|
|
* calibration: 0, 1, 2, 4, 5.
|
|
|
|
*/
|
|
|
|
struct pm8xxx_chan_info {
|
|
|
|
const char *name;
|
|
|
|
const struct xoadc_channel *hwchan;
|
|
|
|
enum vadc_calibration calibration;
|
|
|
|
u8 decimation:2;
|
|
|
|
u8 amux_ip_rsv:3;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct pm8xxx_xoadc - state container for the XOADC
|
|
|
|
* @dev: pointer to device
|
|
|
|
* @map: regmap to access registers
|
|
|
|
* @vref: reference voltage regulator
|
|
|
|
* characteristics of the channels, and sensible default settings
|
|
|
|
* @nchans: number of channels, configured by the device tree
|
|
|
|
* @chans: the channel information per-channel, configured by the device tree
|
|
|
|
* @iio_chans: IIO channel specifiers
|
|
|
|
* @graph: linear calibration parameters for absolute and
|
|
|
|
* ratiometric measurements
|
|
|
|
* @complete: completion to indicate end of conversion
|
|
|
|
* @lock: lock to restrict access to the hardware to one client at the time
|
|
|
|
*/
|
|
|
|
struct pm8xxx_xoadc {
|
|
|
|
struct device *dev;
|
|
|
|
struct regmap *map;
|
|
|
|
const struct xoadc_variant *variant;
|
|
|
|
struct regulator *vref;
|
|
|
|
unsigned int nchans;
|
|
|
|
struct pm8xxx_chan_info *chans;
|
|
|
|
struct iio_chan_spec *iio_chans;
|
|
|
|
struct vadc_linear_graph graph[2];
|
|
|
|
struct completion complete;
|
|
|
|
struct mutex lock;
|
|
|
|
};
|
|
|
|
|
|
|
|
static irqreturn_t pm8xxx_eoc_irq(int irq, void *d)
|
|
|
|
{
|
|
|
|
struct iio_dev *indio_dev = d;
|
|
|
|
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
|
|
|
|
|
|
|
|
complete(&adc->complete);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pm8xxx_chan_info *
|
|
|
|
pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adc->nchans; i++) {
|
|
|
|
struct pm8xxx_chan_info *ch = &adc->chans[i];
|
|
|
|
if (ch->hwchan->amux_channel == chan)
|
|
|
|
return ch;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
|
|
|
|
const struct pm8xxx_chan_info *ch,
|
|
|
|
u8 rsv, u16 *adc_code,
|
|
|
|
bool force_ratiometric)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
unsigned int val;
|
|
|
|
u8 rsvmask, rsvval;
|
|
|
|
u8 lsb, msb;
|
|
|
|
|
|
|
|
dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n",
|
|
|
|
ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv);
|
|
|
|
|
|
|
|
mutex_lock(&adc->lock);
|
|
|
|
|
|
|
|
/* Mux in this channel */
|
|
|
|
val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT;
|
|
|
|
val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT;
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
/* Set up ratiometric scale value, mask off all bits except these */
|
|
|
|
rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 |
|
|
|
|
ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP);
|
|
|
|
if (adc->variant->broken_ratiometric && !force_ratiometric) {
|
|
|
|
/*
|
|
|
|
* Apparently the PM8058 has some kind of bug which is
|
|
|
|
* reflected in the vendor tree drivers/misc/pmix8058-xoadc.c
|
|
|
|
* which just hardcodes the RSV selector to SEL1 (0x20) for
|
|
|
|
* most cases and SEL0 (0x10) for the MUXOFF channel only.
|
|
|
|
* If we force ratiometric (currently only done when attempting
|
|
|
|
* to do ratiometric calibration) this doesn't seem to work
|
|
|
|
* very well and I suspect ratiometric conversion is simply
|
|
|
|
* broken or not supported on the PM8058.
|
|
|
|
*
|
|
|
|
* Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select
|
|
|
|
* the mode alone.
|
|
|
|
*
|
|
|
|
* Some PM8058 register documentation would be nice to get
|
|
|
|
* this right.
|
|
|
|
*/
|
|
|
|
if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF)
|
|
|
|
rsvval = ADC_ARB_USRP_RSV_IP_SEL0;
|
|
|
|
else
|
|
|
|
rsvval = ADC_ARB_USRP_RSV_IP_SEL1;
|
|
|
|
} else {
|
|
|
|
if (rsv == 0xff)
|
|
|
|
rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) |
|
|
|
|
ADC_ARB_USRP_RSV_TRM;
|
|
|
|
else
|
|
|
|
rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) |
|
|
|
|
ADC_ARB_USRP_RSV_TRM;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_update_bits(adc->map,
|
|
|
|
ADC_ARB_USRP_RSV,
|
|
|
|
~rsvmask,
|
|
|
|
rsvval);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM,
|
|
|
|
ADC_ARB_USRP_ANA_PARAM_DIS);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
/* Decimation factor */
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM,
|
|
|
|
ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 |
|
|
|
|
ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 |
|
|
|
|
ch->decimation << ADC_DIG_PARAM_DEC_SHIFT);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM,
|
|
|
|
ADC_ARB_USRP_ANA_PARAM_EN);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
/* Enable the arbiter, the Qualcomm code does it twice like this */
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
|
|
|
|
ADC_ARB_USRP_CNTRL_EN_ARB);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
|
|
|
|
ADC_ARB_USRP_CNTRL_EN_ARB);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
|
|
|
|
/* Fire a request! */
|
|
|
|
reinit_completion(&adc->complete);
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL,
|
|
|
|
ADC_ARB_USRP_CNTRL_EN_ARB |
|
|
|
|
ADC_ARB_USRP_CNTRL_REQ);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
/* Next the interrupt occurs */
|
|
|
|
ret = wait_for_completion_timeout(&adc->complete,
|
|
|
|
VADC_CONV_TIME_MAX_US);
|
|
|
|
if (!ret) {
|
|
|
|
dev_err(adc->dev, "conversion timed out\n");
|
|
|
|
ret = -ETIMEDOUT;
|
|
|
|
goto unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
lsb = val;
|
|
|
|
ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
msb = val;
|
|
|
|
*adc_code = (msb << 8) | lsb;
|
|
|
|
|
|
|
|
/* Turn off the ADC by setting the arbiter to 0 twice */
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0);
|
|
|
|
if (ret)
|
|
|
|
goto unlock;
|
|
|
|
|
|
|
|
unlock:
|
|
|
|
mutex_unlock(&adc->lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc,
|
|
|
|
const struct pm8xxx_chan_info *ch,
|
|
|
|
u16 *adc_code)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Normally we just use the ratiometric scale value (RSV) predefined
|
|
|
|
* for the channel, but during calibration we need to modify this
|
|
|
|
* so this wrapper is a helper hiding the more complex version.
|
|
|
|
*/
|
|
|
|
return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc)
|
|
|
|
{
|
|
|
|
const struct pm8xxx_chan_info *ch;
|
|
|
|
u16 read_1250v;
|
|
|
|
u16 read_0625v;
|
|
|
|
u16 read_nomux_rsv5;
|
|
|
|
u16 read_nomux_rsv4;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
|
|
|
|
adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
|
|
|
|
|
|
|
|
/* Common reference channel calibration */
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V);
|
|
|
|
if (!ch)
|
|
|
|
return -ENODEV;
|
|
|
|
ret = pm8xxx_read_channel(adc, ch, &read_1250v);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(adc->dev, "could not read 1.25V reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL);
|
|
|
|
if (!ch)
|
|
|
|
return -ENODEV;
|
|
|
|
ret = pm8xxx_read_channel(adc, ch, &read_0625v);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(adc->dev, "could not read 0.625V reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
if (read_1250v == read_0625v) {
|
|
|
|
dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v;
|
|
|
|
adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v;
|
|
|
|
|
|
|
|
dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n",
|
|
|
|
VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy);
|
|
|
|
|
|
|
|
/* Ratiometric calibration */
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF);
|
|
|
|
if (!ch)
|
|
|
|
return -ENODEV;
|
|
|
|
ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5,
|
|
|
|
&read_nomux_rsv5, true);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(adc->dev, "could not read MUXOFF reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4,
|
|
|
|
&read_nomux_rsv4, true);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(adc->dev, "could not read MUXOFF reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
adc->graph[VADC_CALIB_RATIOMETRIC].dy =
|
|
|
|
read_nomux_rsv5 - read_nomux_rsv4;
|
|
|
|
adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4;
|
|
|
|
|
|
|
|
dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n",
|
|
|
|
VADC_RATIOMETRIC_RANGE,
|
|
|
|
adc->graph[VADC_CALIB_RATIOMETRIC].dy);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_read_raw(struct iio_dev *indio_dev,
|
|
|
|
struct iio_chan_spec const *chan,
|
|
|
|
int *val, int *val2, long mask)
|
|
|
|
{
|
|
|
|
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
|
|
|
|
const struct pm8xxx_chan_info *ch;
|
|
|
|
u16 adc_code;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
switch (mask) {
|
|
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
|
|
ch = pm8xxx_get_channel(adc, chan->address);
|
|
|
|
if (!ch) {
|
|
|
|
dev_err(adc->dev, "no such channel %lu\n",
|
|
|
|
chan->address);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
ret = pm8xxx_read_channel(adc, ch, &adc_code);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = qcom_vadc_scale(ch->hwchan->scale_fn_type,
|
|
|
|
&adc->graph[ch->calibration],
|
|
|
|
&ch->hwchan->prescale,
|
|
|
|
(ch->calibration == VADC_CALIB_ABSOLUTE),
|
|
|
|
adc_code, val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_RAW:
|
|
|
|
ch = pm8xxx_get_channel(adc, chan->address);
|
|
|
|
if (!ch) {
|
|
|
|
dev_err(adc->dev, "no such channel %lu\n",
|
|
|
|
chan->address);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
ret = pm8xxx_read_channel(adc, ch, &adc_code);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
*val = (int)adc_code;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
|
|
|
|
const struct of_phandle_args *iiospec)
|
|
|
|
{
|
|
|
|
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
|
|
|
|
u8 pre_scale_mux;
|
|
|
|
u8 amux_channel;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* First cell is prescaler or premux, second cell is analog
|
|
|
|
* mux.
|
|
|
|
*/
|
|
|
|
if (iiospec->args_count != 2) {
|
|
|
|
dev_err(&indio_dev->dev, "wrong number of arguments for %s need 2 got %d\n",
|
|
|
|
iiospec->np->name,
|
|
|
|
iiospec->args_count);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
pre_scale_mux = (u8)iiospec->args[0];
|
|
|
|
amux_channel = (u8)iiospec->args[1];
|
|
|
|
dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n",
|
|
|
|
pre_scale_mux, amux_channel);
|
|
|
|
|
|
|
|
/* We need to match exactly on the prescale/premux and channel */
|
|
|
|
for (i = 0; i < adc->nchans; i++)
|
|
|
|
if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux &&
|
|
|
|
adc->chans[i].hwchan->amux_channel == amux_channel)
|
|
|
|
return i;
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct iio_info pm8xxx_xoadc_info = {
|
|
|
|
.driver_module = THIS_MODULE,
|
|
|
|
.of_xlate = pm8xxx_of_xlate,
|
|
|
|
.read_raw = pm8xxx_read_raw,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int pm8xxx_xoadc_parse_channel(struct device *dev,
|
|
|
|
struct device_node *np,
|
|
|
|
const struct xoadc_channel *hw_channels,
|
|
|
|
struct iio_chan_spec *iio_chan,
|
|
|
|
struct pm8xxx_chan_info *ch)
|
|
|
|
{
|
|
|
|
const char *name = np->name;
|
|
|
|
const struct xoadc_channel *hwchan;
|
|
|
|
u32 pre_scale_mux, amux_channel;
|
|
|
|
u32 rsv, dec;
|
|
|
|
int ret;
|
|
|
|
int chid;
|
|
|
|
|
|
|
|
ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "invalid pre scale/mux number %s\n", name);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, "reg", 1, &amux_channel);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "invalid amux channel number %s\n", name);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Find the right channel setting */
|
|
|
|
chid = 0;
|
|
|
|
hwchan = &hw_channels[0];
|
|
|
|
while (hwchan && hwchan->datasheet_name) {
|
|
|
|
if (hwchan->pre_scale_mux == pre_scale_mux &&
|
|
|
|
hwchan->amux_channel == amux_channel)
|
|
|
|
break;
|
|
|
|
hwchan++;
|
|
|
|
chid++;
|
|
|
|
}
|
|
|
|
/* The sentinel does not have a name assigned */
|
|
|
|
if (!hwchan->datasheet_name) {
|
|
|
|
dev_err(dev, "could not locate channel %02x/%02x\n",
|
|
|
|
pre_scale_mux, amux_channel);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
ch->name = name;
|
|
|
|
ch->hwchan = hwchan;
|
|
|
|
/* Everyone seems to use absolute calibration except in special cases */
|
|
|
|
ch->calibration = VADC_CALIB_ABSOLUTE;
|
|
|
|
/* Everyone seems to use default ("type 2") decimation */
|
|
|
|
ch->decimation = VADC_DEF_DECIMATION;
|
|
|
|
|
|
|
|
if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) {
|
|
|
|
ch->calibration = VADC_CALIB_RATIOMETRIC;
|
|
|
|
if (rsv > XOADC_RSV_MAX) {
|
|
|
|
dev_err(dev, "%s too large RSV value %d\n", name, rsv);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (rsv == AMUX_RSV3) {
|
|
|
|
dev_err(dev, "%s invalid RSV value %d\n", name, rsv);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Optional decimation, if omitted we use the default */
|
|
|
|
ret = of_property_read_u32(np, "qcom,decimation", &dec);
|
|
|
|
if (!ret) {
|
|
|
|
ret = qcom_vadc_decimation_from_dt(dec);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "%s invalid decimation %d\n",
|
|
|
|
name, dec);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
ch->decimation = ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
iio_chan->channel = chid;
|
|
|
|
iio_chan->address = hwchan->amux_channel;
|
|
|
|
iio_chan->datasheet_name = hwchan->datasheet_name;
|
|
|
|
iio_chan->type = hwchan->type;
|
|
|
|
/* All channels are raw or processed */
|
|
|
|
iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
|
|
BIT(IIO_CHAN_INFO_PROCESSED);
|
|
|
|
iio_chan->indexed = 1;
|
|
|
|
|
|
|
|
dev_dbg(dev, "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" "
|
|
|
|
"ref voltage: %d, decimation %d "
|
|
|
|
"prescale %d/%d, scale function %d\n",
|
|
|
|
hwchan->pre_scale_mux, hwchan->amux_channel, ch->name,
|
|
|
|
ch->amux_ip_rsv, ch->decimation, hwchan->prescale.num,
|
|
|
|
hwchan->prescale.den, hwchan->scale_fn_type);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
|
|
|
|
struct device_node *np)
|
|
|
|
{
|
|
|
|
struct device_node *child;
|
|
|
|
struct pm8xxx_chan_info *ch;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
adc->nchans = of_get_available_child_count(np);
|
|
|
|
if (!adc->nchans) {
|
|
|
|
dev_err(adc->dev, "no channel children\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans);
|
|
|
|
|
|
|
|
adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans,
|
|
|
|
sizeof(*adc->iio_chans), GFP_KERNEL);
|
|
|
|
if (!adc->iio_chans)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
adc->chans = devm_kcalloc(adc->dev, adc->nchans,
|
|
|
|
sizeof(*adc->chans), GFP_KERNEL);
|
|
|
|
if (!adc->chans)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
|
|
ch = &adc->chans[i];
|
|
|
|
ret = pm8xxx_xoadc_parse_channel(adc->dev, child,
|
|
|
|
adc->variant->channels,
|
|
|
|
&adc->iio_chans[i],
|
|
|
|
ch);
|
|
|
|
if (ret) {
|
|
|
|
of_node_put(child);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check for required channels */
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V);
|
|
|
|
if (!ch) {
|
|
|
|
dev_err(adc->dev, "missing 1.25V reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL);
|
|
|
|
if (!ch) {
|
|
|
|
dev_err(adc->dev, "missing 0.625V reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF);
|
|
|
|
if (!ch) {
|
|
|
|
dev_err(adc->dev, "missing MUXOFF reference channel\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_xoadc_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
const struct xoadc_variant *variant;
|
|
|
|
struct pm8xxx_xoadc *adc;
|
|
|
|
struct iio_dev *indio_dev;
|
|
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
struct regmap *map;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
variant = of_device_get_match_data(dev);
|
|
|
|
if (!variant)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
|
|
|
|
if (!indio_dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
|
|
|
|
adc = iio_priv(indio_dev);
|
|
|
|
adc->dev = dev;
|
|
|
|
adc->variant = variant;
|
|
|
|
init_completion(&adc->complete);
|
|
|
|
mutex_init(&adc->lock);
|
|
|
|
|
|
|
|
ret = pm8xxx_xoadc_parse_channels(adc, np);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
map = dev_get_regmap(dev->parent, NULL);
|
|
|
|
if (!map) {
|
|
|
|
dev_err(dev, "parent regmap unavailable.\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
adc->map = map;
|
|
|
|
|
|
|
|
/* Bring up regulator */
|
|
|
|
adc->vref = devm_regulator_get(dev, "xoadc-ref");
|
|
|
|
if (IS_ERR(adc->vref)) {
|
|
|
|
dev_err(dev, "failed to get XOADC VREF regulator\n");
|
|
|
|
return PTR_ERR(adc->vref);
|
|
|
|
}
|
|
|
|
ret = regulator_enable(adc->vref);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to enable XOADC VREF regulator\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0),
|
|
|
|
pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "unable to request IRQ\n");
|
|
|
|
goto out_disable_vref;
|
|
|
|
}
|
|
|
|
|
|
|
|
indio_dev->dev.parent = dev;
|
|
|
|
indio_dev->dev.of_node = np;
|
|
|
|
indio_dev->name = variant->name;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
indio_dev->info = &pm8xxx_xoadc_info;
|
|
|
|
indio_dev->channels = adc->iio_chans;
|
|
|
|
indio_dev->num_channels = adc->nchans;
|
|
|
|
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
|
|
if (ret)
|
|
|
|
goto out_disable_vref;
|
|
|
|
|
|
|
|
ret = pm8xxx_calibrate_device(adc);
|
|
|
|
if (ret)
|
|
|
|
goto out_unreg_device;
|
|
|
|
|
|
|
|
dev_info(dev, "%s XOADC driver enabled\n", variant->name);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_unreg_device:
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
out_disable_vref:
|
|
|
|
regulator_disable(adc->vref);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pm8xxx_xoadc_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
|
|
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
|
|
|
|
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
|
|
|
|
regulator_disable(adc->vref);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct xoadc_variant pm8018_variant = {
|
|
|
|
.name = "PM8018-XOADC",
|
|
|
|
.channels = pm8018_xoadc_channels,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xoadc_variant pm8038_variant = {
|
|
|
|
.name = "PM8038-XOADC",
|
|
|
|
.channels = pm8038_xoadc_channels,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xoadc_variant pm8058_variant = {
|
|
|
|
.name = "PM8058-XOADC",
|
|
|
|
.channels = pm8058_xoadc_channels,
|
|
|
|
.broken_ratiometric = true,
|
|
|
|
.prescaling = true,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xoadc_variant pm8921_variant = {
|
|
|
|
.name = "PM8921-XOADC",
|
|
|
|
.channels = pm8921_xoadc_channels,
|
|
|
|
.second_level_mux = true,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct of_device_id pm8xxx_xoadc_id_table[] = {
|
|
|
|
{
|
|
|
|
.compatible = "qcom,pm8018-adc",
|
|
|
|
.data = &pm8018_variant,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.compatible = "qcom,pm8038-adc",
|
|
|
|
.data = &pm8038_variant,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.compatible = "qcom,pm8058-adc",
|
|
|
|
.data = &pm8058_variant,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.compatible = "qcom,pm8921-adc",
|
|
|
|
.data = &pm8921_variant,
|
|
|
|
},
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table);
|
|
|
|
|
|
|
|
static struct platform_driver pm8xxx_xoadc_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "pm8xxx-adc",
|
|
|
|
.of_match_table = pm8xxx_xoadc_id_table,
|
|
|
|
},
|
|
|
|
.probe = pm8xxx_xoadc_probe,
|
|
|
|
.remove = pm8xxx_xoadc_remove,
|
|
|
|
};
|
|
|
|
module_platform_driver(pm8xxx_xoadc_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("PM8xxx XOADC driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_ALIAS("platform:pm8xxx-xoadc");
|