/*
 * Copyright (C) 2010-2011, 2013 ARM Limited. All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *       http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @file ump_debug.h
 *
 * The file include several useful macros for debugging and printing.
 * - UMP_PRINTF(...)           Do not use this function: Will be included in Release builds.
 * - UMP_DEBUG_TRACE()         Prints current location in code.
 * - UMP_DEBUG_PRINT(nr, (X) ) Prints the second argument if nr<=UMP_DEBUG_LEVEL.
 * - UMP_DEBUG_TPRINT(nr, X )  Prints the source trace and second argument if nr<=UMP_DEBUG_LEVEL.
 * - UMP_DEBUG_ERROR( (X) )    Prints an errortext, a source trace, and the given error message.
 * - UMP_DEBUG_ASSERT(exp,(X)) If the asserted expr is false, the program will exit.
 * - UMP_DEBUG_ASSERT_RANGE(x, min, max) Triggers if variable x is not between or equal to max and min.
 * - UMP_DEBUG_ASSERT_LEQ(x, max) Triggers if variable x is not less than equal to max.
 * - UMP_DEBUG_ASSERT_POINTER(pointer)  Triggers if the pointer is a zero pointer.
 * - UMP_DEBUG_CODE( X )       The code inside the macro is only copiled in Debug builds.
 *
 * The (X) means that you must add an extra parantese around the argumentlist.
 *
 * The  printf function: UMP_PRINTF(...) is routed to _ump_sys_printf
 *
 * Suggested range for the DEBUG-LEVEL is [1:6] where
 * [1:2] Is messages with highest priority, indicate possible errors.
 * [3:4] Is messages with medium priority, output important variables.
 * [5:6] Is messages with low priority, used during extensive debugging.
 *
 */
#ifndef _UMP_DEBUG_H_
#define _UMP_DEBUG_H_

#include <stdio.h>
#include <stdlib.h>
#include <cutils/log.h>

/* START: Configuration */
#ifndef UMP_PRINTF
	#define UMP_PRINTF printf
#endif /* UMP_PRINTF */

#ifndef UMP_PRINT_FLUSH
	#define UMP_PRINT_FLUSH do {} while (0)
#endif /* UMP_PRINT_FLUSH */

#ifndef UMP_DEBUG_LEVEL
    #define UMP_DEBUG_LEVEL 1
#endif /* UMP_DEBUG_LEVEL */

#ifndef UMP_DEBUG_ERROR_START_MSG
    #define UMP_DEBUG_ERROR_START_MSG do {\
    UMP_PRINTF("*********************************************************************\n");\
    UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_ERROR_START_MSG */

#ifndef UMP_DEBUG_ERROR_STOP_MSG
    #define UMP_DEBUG_ERROR_STOP_MSG  do { UMP_PRINTF("\n"); UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_ERROR_STOP_MSG */

#ifndef UMP_ASSERT_QUIT_CMD
	#define UMP_ASSERT_QUIT_CMD    abort()
#endif /* UMP_ASSERT_QUIT_CMD */
/* STOP: Configuration */

/**
 *	The macro UMP_FUNCTION evaluates to the name of the function enclosing
 *	this macro's usage, or "<unknown>" if not supported.
 */
#if (defined(__SYMBIAN32__) && defined(__ARMCC__)) || defined(_MSC_VER)
#	define UMP_FUNCTION __FUNCTION__
#elif __STDC__  && __STDC_VERSION__ >= 199901L
#	define UMP_FUNCTION __FUNCTION__
#elif defined(__GNUC__) && __GNUC__ >= 2
#	define UMP_FUNCTION __FUNCTION__
#elif defined(__func__)
#	define UMP_FUNCTION __func__
#else
#	define UMP_FUNCTION "<unknown>"
#endif

/**
 *	Explicitly ignore a parameter passed into a function, to suppress compiler warnings.
 *	Should only be used with parameter names.
 */
#define UMP_IGNORE(x) (void)x

/**
 * @def     UMP_DEBUG_TRACE()
 * @brief   Prints current location in code.
 *          Can be turned off by defining UMP_DEBUG_SKIP_TRACE
 */

#ifndef UMP_DEBUG_SKIP_TRACE
    #ifndef UMP_DEBUG_SKIP_PRINT_FUNCTION_NAME
        #define UMP_DEBUG_TRACE()  do { UMP_PRINTF( "In file: "__FILE__ \
                        "  function: %s()   line:%4d\n" , UMP_FUNCTION, __LINE__);  UMP_PRINT_FLUSH; } while (0)
	#else
        #define UMP_DEBUG_TRACE()  do { UMP_PRINTF( "In file: "__FILE__ "  line:%4d\n" , __LINE__);  UMP_PRINT_FLUSH; } while (0)
	#endif /* UMP_DEBUG_SKIP_PRINT_FUNCTION_NAME */
#else
    #define UMP_DEBUG_TRACE()
#endif /* UMP_DEBUG_SKIP_TRACE */

/**
 * @def     UMP_DEBUG_PRINT(nr, (X) )
 * @brief   Prints the second argument if nr<=UMP_DEBUG_LEVEL.
 *          Can be turned off by defining UMP_DEBUG_SKIP_PRINT
 * @param   nr   If nr <= UMP_DEBUG_LEVEL, we print the text.
 * @param   X  A parantese with the contents to be sent to UMP_PRINTF
 */
#ifndef UMP_DEBUG_SKIP_PRINT
    #define UMP_DEBUG_PRINT(nr, X )  if ( nr<=UMP_DEBUG_LEVEL ) ALOGE X ;
#else
    #define UMP_DEBUG_PRINT(nr, X )
#endif /* UMP_DEBUG_SKIP_PRINT */

/**
 * @def     UMP_DEBUG_TPRINT(nr, (X) )
 * @brief   Prints the second argument if nr<=UMP_DEBUG_LEVEL.
 *          Can be turned off by defining UMP_DEBUG_SKIP_TPRINT.
 *          Can be shortened by defining UMP_DEBUG_TPRINT_SKIP_FUNCTION.
 * @param   nr   If nr <= UMP_DEBUG_LEVEL, we print the text.
 * @param   X  A parantese with the contents to be sent to UMP_PRINTF
 */

/* helper to handle if the function name should be included or not */
#ifndef UMP_DEBUG_TPRINT_SKIP_FUNCTION
    #define UMP_DEBUG_TPRINT_INTERN do {UMP_PRINTF( ""__FILE__" %s()%4d " , UMP_FUNCTION, __LINE__); UMP_PRINT_FLUSH; }  while (0)
#else
    #define UMP_DEBUG_TPRINT_INTERN do {UMP_PRINTF( ""__FILE__ "%4d " , __LINE__); UMP_PRINT_FLUSH; }  while (0)
#endif /* UMP_DEBUG_TPRINT_SKIP_FUNCTION */

#ifndef UMP_DEBUG_SKIP_TPRINT
	#define UMP_DEBUG_TPRINT(nr, X ) \
    do{\
        if ( nr<=UMP_DEBUG_LEVEL )\
        {\
            UMP_DEBUG_TPRINT_INTERN;\
            UMP_PRINTF X ;\
            UMP_PRINT_FLUSH;\
        }\
    } while (0)
#else
    #define UMP_DEBUG_TPRINT(nr, X )
#endif /* UMP_DEBUG_SKIP_TPRINT */

/**
 * @def     UMP_DEBUG_ERROR( (X) )
 * @brief   Prints an errortext, a source Trace, and the given error message.
 *          Prints filename, function, linenr, and the given error message.
 *          The error message must be inside a second parantese.
 *          The error message is written on a separate line, and a NL char is added.
 *          Can be turned of by defining UMP_DEBUG_SKIP_ERROR;
 *          You do not need to type the words ERROR in the message, since it will
 *          be added anyway.
 *
 * @note    You should not end the text with a newline, since it is added by the macro.
 * @note    You should not write "ERROR" in the text, since it is added by the macro.
 * @param    X  A parantese with the contents to be sent to UMP_PRINTF
 */

#ifndef UMP_DEBUG_SKIP_ERROR
    #define UMP_DEBUG_ERROR( X )  \
        do{ \
            UMP_DEBUG_ERROR_START_MSG;\
            UMP_PRINTF("ERROR: ");\
            UMP_PRINT_FLUSH;\
            UMP_DEBUG_TRACE(); \
            UMP_PRINTF X ; \
            UMP_PRINT_FLUSH;\
            UMP_DEBUG_ERROR_STOP_MSG;\
        } while (0)
#else
    #define UMP_DEBUG_ERROR( X ) do{ ; } while ( 0 )
#endif /* UMP_DEBUG_SKIP_ERROR */

/**
 * @def     UMP_DEBUG_ASSERT(expr, (X) )
 * @brief   If the asserted expr is false, the program will exit.
 *          Prints filename, function, linenr, and the given error message.
 *          The error message must be inside a second parantese.
 *          The error message is written on a separate line, and a NL char is added.
 *          Can be turned of by defining UMP_DEBUG_SKIP_ERROR;
 *          You do not need to type the words ASSERT in the message, since it will
 *          be added anyway.
 *
 * @param    X  A parantese with the contents to be sent to UMP_PRINTF
 *          Prints filename, function, linenr, and the error message
 *          on a separte line. A newline char is added at the end.
 *          Can be turned of by defining UMP_DEBUG_SKIP_ASSERT
 * @param   expr  Will exit program if \a expr is false;
 * @param   (X)  Text that will be written if the assertion toggles.
 */

#ifndef UMP_DEBUG_SKIP_ASSERT
    #define UMP_DEBUG_ASSERT(expr, X ) \
    do{\
        if ( !(expr) ) \
        { \
                UMP_DEBUG_ERROR_START_MSG;\
                UMP_PRINTF("ASSERT EXIT: ");\
                UMP_PRINT_FLUSH;\
                UMP_DEBUG_TRACE(); \
                UMP_PRINTF X ; \
                UMP_PRINT_FLUSH;\
                UMP_DEBUG_ERROR_STOP_MSG;\
                UMP_ASSERT_QUIT_CMD;\
        }\
    } while (0)
#else
	#define UMP_DEBUG_ASSERT(expr, X)
#endif /* UMP_DEBUG_SKIP_ASSERT */


/**
 * @def     UMP_DEBUG_ASSERT_POINTER(pointer)
 * @brief   If the asserted pointer is NULL, the program terminates and TRACE info is printed
 *          The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
 */
#define UMP_DEBUG_ASSERT_POINTER(pointer) UMP_DEBUG_ASSERT(pointer, ("Null pointer " #pointer) )

/**
 * @def     UMP_DEBUG_ASSERT_HANDLE(handle)
 * @brief   If the asserted handle is not a valid handle, the program terminates and TRACE info is printed
 *          The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
 */
#define UMP_DEBUG_ASSERT_HANDLE(handle) UMP_DEBUG_ASSERT(UMP_NO_HANDLE != (handle), ("Invalid handle" #handle) )

/**
 * @def     UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align)
 * @brief   If the asserted pointer is  not aligned to align, the program terminates with trace info printed.
 *          The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
 */
#ifndef UMP_DEBUG_SKIP_ASSERT
	#define UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align) do {                                                    \
		UMP_DEBUG_ASSERT(0 == (align & (align - 1)), ("align %d is not a power-of-two", align));           \
		UMP_DEBUG_ASSERT(0 == (((u32)(ptr)) & (align - 1)), ("ptr %p not aligned to %d bytes", (void*)ptr, align)); \
		} while (0)
#else
	#define UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align)
#endif /* UMP_DEBUG_SKIP_ASSERT */

/**
 * @def     UMP_DEBUG_ASSERT_RANGE(x,min,max)
 * @brief   If variable x is not between or equal to max and min, the assertion triggers.
 *          The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
 */
#define UMP_DEBUG_ASSERT_RANGE(x, min, max) \
	UMP_DEBUG_ASSERT( (x) >= (min) && (x) <= (max), \
			   (#x " out of range (%2.2f)", (double)x ) \
			 )

/**
 * @def     UMP_DEBUG_ASSERT_LEQ(x,max)
 * @brief   If variable x is less than or equal to max, the assertion triggers.
 *          The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
 */
#define UMP_DEBUG_ASSERT_LEQ(x, max) \
	UMP_DEBUG_ASSERT( (x) <= (max), \
			   (#x " out of range (%2.2f)", (double)x ) \
			 )

/**
 * @def     UMP_DEBUG_CODE( X )
 * @brief   Run the code X on debug builds.
 *          The code will not be used if UMP_DEBUG_SKIP_CODE is defined .
 *
 */
#ifdef UMP_DEBUG_SKIP_CODE
    #define UMP_DEBUG_CODE( X )
#else
    #define UMP_DEBUG_CODE( X ) X
#endif /* UMP_DEBUG_SKIP_CODE */

#endif /* _UMP_DEBUG_H_ */