You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
hardware_samsung/exynos4/hal/libUMP/include/ump/ump_debug.h

289 lines
11 KiB

/*
* Copyright (C) 2010-2011, 2013 ARM Limited. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file ump_debug.h
*
* The file include several useful macros for debugging and printing.
* - UMP_PRINTF(...) Do not use this function: Will be included in Release builds.
* - UMP_DEBUG_TRACE() Prints current location in code.
* - UMP_DEBUG_PRINT(nr, (X) ) Prints the second argument if nr<=UMP_DEBUG_LEVEL.
* - UMP_DEBUG_TPRINT(nr, X ) Prints the source trace and second argument if nr<=UMP_DEBUG_LEVEL.
* - UMP_DEBUG_ERROR( (X) ) Prints an errortext, a source trace, and the given error message.
* - UMP_DEBUG_ASSERT(exp,(X)) If the asserted expr is false, the program will exit.
* - UMP_DEBUG_ASSERT_RANGE(x, min, max) Triggers if variable x is not between or equal to max and min.
* - UMP_DEBUG_ASSERT_LEQ(x, max) Triggers if variable x is not less than equal to max.
* - UMP_DEBUG_ASSERT_POINTER(pointer) Triggers if the pointer is a zero pointer.
* - UMP_DEBUG_CODE( X ) The code inside the macro is only copiled in Debug builds.
*
* The (X) means that you must add an extra parantese around the argumentlist.
*
* The printf function: UMP_PRINTF(...) is routed to _ump_sys_printf
*
* Suggested range for the DEBUG-LEVEL is [1:6] where
* [1:2] Is messages with highest priority, indicate possible errors.
* [3:4] Is messages with medium priority, output important variables.
* [5:6] Is messages with low priority, used during extensive debugging.
*
*/
#ifndef _UMP_DEBUG_H_
#define _UMP_DEBUG_H_
#include <stdio.h>
#include <stdlib.h>
#include <cutils/log.h>
/* START: Configuration */
#ifndef UMP_PRINTF
#define UMP_PRINTF printf
#endif /* UMP_PRINTF */
#ifndef UMP_PRINT_FLUSH
#define UMP_PRINT_FLUSH do {} while (0)
#endif /* UMP_PRINT_FLUSH */
#ifndef UMP_DEBUG_LEVEL
#define UMP_DEBUG_LEVEL 1
#endif /* UMP_DEBUG_LEVEL */
#ifndef UMP_DEBUG_ERROR_START_MSG
#define UMP_DEBUG_ERROR_START_MSG do {\
UMP_PRINTF("*********************************************************************\n");\
UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_ERROR_START_MSG */
#ifndef UMP_DEBUG_ERROR_STOP_MSG
#define UMP_DEBUG_ERROR_STOP_MSG do { UMP_PRINTF("\n"); UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_ERROR_STOP_MSG */
#ifndef UMP_ASSERT_QUIT_CMD
#define UMP_ASSERT_QUIT_CMD abort()
#endif /* UMP_ASSERT_QUIT_CMD */
/* STOP: Configuration */
/**
* The macro UMP_FUNCTION evaluates to the name of the function enclosing
* this macro's usage, or "<unknown>" if not supported.
*/
#if (defined(__SYMBIAN32__) && defined(__ARMCC__)) || defined(_MSC_VER)
# define UMP_FUNCTION __FUNCTION__
#elif __STDC__ && __STDC_VERSION__ >= 199901L
# define UMP_FUNCTION __FUNCTION__
#elif defined(__GNUC__) && __GNUC__ >= 2
# define UMP_FUNCTION __FUNCTION__
#elif defined(__func__)
# define UMP_FUNCTION __func__
#else
# define UMP_FUNCTION "<unknown>"
#endif
/**
* Explicitly ignore a parameter passed into a function, to suppress compiler warnings.
* Should only be used with parameter names.
*/
#define UMP_IGNORE(x) (void)x
/**
* @def UMP_DEBUG_TRACE()
* @brief Prints current location in code.
* Can be turned off by defining UMP_DEBUG_SKIP_TRACE
*/
#ifndef UMP_DEBUG_SKIP_TRACE
#ifndef UMP_DEBUG_SKIP_PRINT_FUNCTION_NAME
#define UMP_DEBUG_TRACE() do { UMP_PRINTF( "In file: "__FILE__ \
" function: %s() line:%4d\n" , UMP_FUNCTION, __LINE__); UMP_PRINT_FLUSH; } while (0)
#else
#define UMP_DEBUG_TRACE() do { UMP_PRINTF( "In file: "__FILE__ " line:%4d\n" , __LINE__); UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_SKIP_PRINT_FUNCTION_NAME */
#else
#define UMP_DEBUG_TRACE()
#endif /* UMP_DEBUG_SKIP_TRACE */
/**
* @def UMP_DEBUG_PRINT(nr, (X) )
* @brief Prints the second argument if nr<=UMP_DEBUG_LEVEL.
* Can be turned off by defining UMP_DEBUG_SKIP_PRINT
* @param nr If nr <= UMP_DEBUG_LEVEL, we print the text.
* @param X A parantese with the contents to be sent to UMP_PRINTF
*/
#ifndef UMP_DEBUG_SKIP_PRINT
#define UMP_DEBUG_PRINT(nr, X ) if ( nr<=UMP_DEBUG_LEVEL ) ALOGE X ;
#else
#define UMP_DEBUG_PRINT(nr, X )
#endif /* UMP_DEBUG_SKIP_PRINT */
/**
* @def UMP_DEBUG_TPRINT(nr, (X) )
* @brief Prints the second argument if nr<=UMP_DEBUG_LEVEL.
* Can be turned off by defining UMP_DEBUG_SKIP_TPRINT.
* Can be shortened by defining UMP_DEBUG_TPRINT_SKIP_FUNCTION.
* @param nr If nr <= UMP_DEBUG_LEVEL, we print the text.
* @param X A parantese with the contents to be sent to UMP_PRINTF
*/
/* helper to handle if the function name should be included or not */
#ifndef UMP_DEBUG_TPRINT_SKIP_FUNCTION
#define UMP_DEBUG_TPRINT_INTERN do {UMP_PRINTF( ""__FILE__" %s()%4d " , UMP_FUNCTION, __LINE__); UMP_PRINT_FLUSH; } while (0)
#else
#define UMP_DEBUG_TPRINT_INTERN do {UMP_PRINTF( ""__FILE__ "%4d " , __LINE__); UMP_PRINT_FLUSH; } while (0)
#endif /* UMP_DEBUG_TPRINT_SKIP_FUNCTION */
#ifndef UMP_DEBUG_SKIP_TPRINT
#define UMP_DEBUG_TPRINT(nr, X ) \
do{\
if ( nr<=UMP_DEBUG_LEVEL )\
{\
UMP_DEBUG_TPRINT_INTERN;\
UMP_PRINTF X ;\
UMP_PRINT_FLUSH;\
}\
} while (0)
#else
#define UMP_DEBUG_TPRINT(nr, X )
#endif /* UMP_DEBUG_SKIP_TPRINT */
/**
* @def UMP_DEBUG_ERROR( (X) )
* @brief Prints an errortext, a source Trace, and the given error message.
* Prints filename, function, linenr, and the given error message.
* The error message must be inside a second parantese.
* The error message is written on a separate line, and a NL char is added.
* Can be turned of by defining UMP_DEBUG_SKIP_ERROR;
* You do not need to type the words ERROR in the message, since it will
* be added anyway.
*
* @note You should not end the text with a newline, since it is added by the macro.
* @note You should not write "ERROR" in the text, since it is added by the macro.
* @param X A parantese with the contents to be sent to UMP_PRINTF
*/
#ifndef UMP_DEBUG_SKIP_ERROR
#define UMP_DEBUG_ERROR( X ) \
do{ \
UMP_DEBUG_ERROR_START_MSG;\
UMP_PRINTF("ERROR: ");\
UMP_PRINT_FLUSH;\
UMP_DEBUG_TRACE(); \
UMP_PRINTF X ; \
UMP_PRINT_FLUSH;\
UMP_DEBUG_ERROR_STOP_MSG;\
} while (0)
#else
#define UMP_DEBUG_ERROR( X ) do{ ; } while ( 0 )
#endif /* UMP_DEBUG_SKIP_ERROR */
/**
* @def UMP_DEBUG_ASSERT(expr, (X) )
* @brief If the asserted expr is false, the program will exit.
* Prints filename, function, linenr, and the given error message.
* The error message must be inside a second parantese.
* The error message is written on a separate line, and a NL char is added.
* Can be turned of by defining UMP_DEBUG_SKIP_ERROR;
* You do not need to type the words ASSERT in the message, since it will
* be added anyway.
*
* @param X A parantese with the contents to be sent to UMP_PRINTF
* Prints filename, function, linenr, and the error message
* on a separte line. A newline char is added at the end.
* Can be turned of by defining UMP_DEBUG_SKIP_ASSERT
* @param expr Will exit program if \a expr is false;
* @param (X) Text that will be written if the assertion toggles.
*/
#ifndef UMP_DEBUG_SKIP_ASSERT
#define UMP_DEBUG_ASSERT(expr, X ) \
do{\
if ( !(expr) ) \
{ \
UMP_DEBUG_ERROR_START_MSG;\
UMP_PRINTF("ASSERT EXIT: ");\
UMP_PRINT_FLUSH;\
UMP_DEBUG_TRACE(); \
UMP_PRINTF X ; \
UMP_PRINT_FLUSH;\
UMP_DEBUG_ERROR_STOP_MSG;\
UMP_ASSERT_QUIT_CMD;\
}\
} while (0)
#else
#define UMP_DEBUG_ASSERT(expr, X)
#endif /* UMP_DEBUG_SKIP_ASSERT */
/**
* @def UMP_DEBUG_ASSERT_POINTER(pointer)
* @brief If the asserted pointer is NULL, the program terminates and TRACE info is printed
* The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
*/
#define UMP_DEBUG_ASSERT_POINTER(pointer) UMP_DEBUG_ASSERT(pointer, ("Null pointer " #pointer) )
/**
* @def UMP_DEBUG_ASSERT_HANDLE(handle)
* @brief If the asserted handle is not a valid handle, the program terminates and TRACE info is printed
* The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
*/
#define UMP_DEBUG_ASSERT_HANDLE(handle) UMP_DEBUG_ASSERT(UMP_NO_HANDLE != (handle), ("Invalid handle" #handle) )
/**
* @def UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align)
* @brief If the asserted pointer is not aligned to align, the program terminates with trace info printed.
* The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
*/
#ifndef UMP_DEBUG_SKIP_ASSERT
#define UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align) do { \
UMP_DEBUG_ASSERT(0 == (align & (align - 1)), ("align %d is not a power-of-two", align)); \
UMP_DEBUG_ASSERT(0 == (((u32)(ptr)) & (align - 1)), ("ptr %p not aligned to %d bytes", (void*)ptr, align)); \
} while (0)
#else
#define UMP_DEBUG_ASSERT_ALIGNMENT(ptr, align)
#endif /* UMP_DEBUG_SKIP_ASSERT */
/**
* @def UMP_DEBUG_ASSERT_RANGE(x,min,max)
* @brief If variable x is not between or equal to max and min, the assertion triggers.
* The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
*/
#define UMP_DEBUG_ASSERT_RANGE(x, min, max) \
UMP_DEBUG_ASSERT( (x) >= (min) && (x) <= (max), \
(#x " out of range (%2.2f)", (double)x ) \
)
/**
* @def UMP_DEBUG_ASSERT_LEQ(x,max)
* @brief If variable x is less than or equal to max, the assertion triggers.
* The checking is disabled if "UMP_DEBUG_SKIP_ASSERT" is defined.
*/
#define UMP_DEBUG_ASSERT_LEQ(x, max) \
UMP_DEBUG_ASSERT( (x) <= (max), \
(#x " out of range (%2.2f)", (double)x ) \
)
/**
* @def UMP_DEBUG_CODE( X )
* @brief Run the code X on debug builds.
* The code will not be used if UMP_DEBUG_SKIP_CODE is defined .
*
*/
#ifdef UMP_DEBUG_SKIP_CODE
#define UMP_DEBUG_CODE( X )
#else
#define UMP_DEBUG_CODE( X ) X
#endif /* UMP_DEBUG_SKIP_CODE */
#endif /* _UMP_DEBUG_H_ */