From 2cc8aba598c7cdaa3b77e7d504c4a229a3234f70 Mon Sep 17 00:00:00 2001
From: Ruchit <risenid@duck.com>
Date: Tue, 19 Sep 2023 19:43:56 +0530
Subject: [PATCH] sm7125: overlay: Set some display overlays and props

---
 .../base/core/res/res/values/config.xml       | 61 +++++++++++++++++--
 .../packages/SystemUI/res/values/config.xml   |  3 +
 .../apps/Settings/res/values/config.xml       |  3 +
 vendor.prop                                   |  3 +
 4 files changed, 64 insertions(+), 6 deletions(-)

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index fe63dc2..850d528 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -1191,12 +1191,6 @@
          The user is forbidden from setting the brightness above this level. -->
     <item name="config_screenBrightnessSettingMaximumFloat" format="float" type="dimen">1.0</item>
 
-    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
-         the framework from using higher refresh rates, even if display modes with higher refresh
-         rates are available from hardware composer. Only has an effect if the value is
-         non-zero. -->
-    <integer name="config_defaultPeakRefreshRate">90</integer>
-
     <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
          on the headphone/microphone jack. When false use the older uevent framework. -->
     <bool name="config_useDevInputEventForAudioJack">true</bool>
@@ -1245,6 +1239,23 @@
 
     <!-- If true, the display will be shifted around in ambient mode. -->
     <bool name="config_enableBurnInProtection">true</bool>
+    <bool name="config_statusBarBurnInProtection">true</bool>
+
+    <!-- Specifies the maximum burn-in offset displacement from the center. If -1, no maximum value
+         will be used. -->
+    <integer name="config_burnInProtectionMaxRadius">70</integer>
+
+    <!-- Specifies the minimum burn-in offset horizontally. -->
+    <integer name="config_burnInProtectionMinHorizontalOffset">-15</integer>
+
+    <!-- Specifies the maximum burn-in offset horizontally. -->
+    <integer name="config_burnInProtectionMaxHorizontalOffset">15</integer>
+
+    <!-- Specifies the minimum burn-in offset vertically. -->
+    <integer name="config_burnInProtectionMinVerticalOffset">-40</integer>
+
+    <!-- Specifies the maximum burn-in offset vertically. -->
+    <integer name="config_burnInProtectionMaxVerticalOffset">40</integer>
 
     <!-- Whether device supports double tap to wake -->
     <bool name="config_supportDoubleTapWake">true</bool>
@@ -1355,4 +1366,42 @@
         <item>500</item>
         <item>600</item>
     </integer-array>
+
+    <!-- Refresh rate configs -->
+    <integer name="config_defaultFixedOnPeakRefreshRate">0</integer>
+    <integer name="config_defaultMinRefreshRate">60</integer>
+    <integer name="config_defaultPeakRefreshRate">90</integer>
+    <integer name="config_defaultRefreshRate">0</integer>
+    <integer name="config_defaultRefreshRateInZone">90</integer>
+
+    <!-- Power Management: Specifies whether to decouple the interactive state of the
+         device from the display on/off state.
+         When false, setInteractive(..., true) will be called before the display is turned on
+         and setInteractive(..., false) will be called after the display is turned off.
+         This mode provides best compatibility for devices that expect the interactive
+         state to be tied to the display state.
+         When true, setInteractive(...) will be called independently of whether the display
+         is being turned on or off.  This mode enables the power manager to reduce
+         clocks and disable the touch controller while the display is on.
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+         Refer to power.h for details.
+    -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
+         device from the display on/off state.
+         When false, autosuspend_disable() will be called before the display is turned on
+         and autosuspend_enable() will be called after the display is turned off.
+         This mode provides best compatibility for devices using legacy power management
+         features such as early suspend / late resume.
+         When true, autosuspend_display() and autosuspend_enable() will be called
+         independently of whether the display is being turned on or off.  This mode
+         enables the power manager to suspend the application processor while the
+         display is on.
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+         Refer to autosuspend.h for details.
+    -->
+    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
 </resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
index fd30526..57a4195 100644
--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -33,4 +33,7 @@
 
     <!-- If not zero, limits the internal screen recorder's framerate to the set value. -->
     <integer name="config_screenRecorderMaxFramerate">60</integer>
+
+    <!-- Preferred max refresh rate at AOD & Ambient Display, if supported by the display. -->
+    <integer name="config_aodMaxRefreshRate">60</integer>
 </resources>
diff --git a/overlay/packages/apps/Settings/res/values/config.xml b/overlay/packages/apps/Settings/res/values/config.xml
index 80d8372..eee669b 100644
--- a/overlay/packages/apps/Settings/res/values/config.xml
+++ b/overlay/packages/apps/Settings/res/values/config.xml
@@ -34,4 +34,7 @@
          should be either LOW (1) or HIGH (3).
     -->
     <integer name="config_vibration_supported_intensity_levels">3</integer>
+
+    <!-- Whether to show Smooth Display feature in Settings Options -->
+    <bool name="config_show_smooth_display">true</bool>
 </resources>
diff --git a/vendor.prop b/vendor.prop
index 0d8c3b7..a0193b9 100644
--- a/vendor.prop
+++ b/vendor.prop
@@ -180,6 +180,9 @@ ro.surface_flinger.force_hwc_copy_for_virtual_displays=true
 ro.surface_flinger.max_virtual_display_dimension=4096
 ro.surface_flinger.max_frame_buffer_acquired_buffers=3
 ro.surface_flinger.use_content_detection_for_refresh_rate=false
+ro.surface_flinger.set_touch_timer_ms=500
+ro.surface_flinger.set_idle_timer_ms=3000
+ro.surface_flinger.set_display_power_timer_ms=1000
 ro.hardware.vulkan=adreno
 ro.hardware.egl=adreno
 ro.opengles.version=196610